SPS101 DC Sensor Power Supply

Online Learning Contact a Banner Engineer About Your Application
Product image

Overview

  • Converts 120V ac voltage to dc for powering any Banner dc sensor with a 4-pin or 5-pin Euro-style quick disconnect
  • Offers two output options:
    • SPS100 models with a 5-amp-rated SPST electromechanical relay output
    • SPS100S models with optically isolated solid-state output
  • Provides choice of models for sensors with integral or pigtail style quick disconnect
  • Features Output and Status indicators
SPS101 power supplies are not for use with NAMUR sensors or personnel safety products.

Product Specifications

Supply Voltage105 to 130V ac (60 Hz)
Output Power120 mA max.: 12V dc min., 30V dc max. (dependent on load)
Output ConfigurationSPS101Q(P) models:SPST electromechanical relay (Form A)
SPS101SQ(P) models:Optically isolated SPST solid-state switch
Output RatingSPS101Q(P) models:
Max. switching power (resistive load):150W, 600VA
Max. switching voltage (resistive load):250V ac or 30V dc (120V ac max. per UL & CSA)
Max. switching current (resistive load):5 A
Min. voltage and current:1 A @ 5V dc; 0.1 A @ 24V dc
Peak switching voltage:750V ac (transient suppression recommended)
Mechanical life of relay:10,000,000 operations
SPS101SQ(P) models:
Max. switching voltage:250V ac or dc
Max. switching current:300 mA
ON-state saturation voltage:less than 3V @ 300 mA; less than 2V @ 15 mA
OFF-state leakage current:less than 50 µA
Inrush current: 1 A for 20 milliseconds, non-repetitive
Note:Output of the solid-state models is not short-circuit protected. Exercise care when making wiring connections.
Status Indicators2 LED Indicators:Green and Red
Green ON steady:power ON
Red ON steady:output ON
ConnectionsPower connector:5-pin Mini-style quick-disconnect fitting. QD cables are ordered separately.
Sensor connector:
Q suffix:5-pin Euro-style quick-disconnect fitting
QP suffix:0.5 m shielded pigtail with 5-pin Euro-style quick-disconnect fitting
Environmental RatingIEC IP54
Operating ConditionsTemperature:-20° to +50° C
Relative humidity:90% @ 50° C (non-condensing)
Additional NotesCompatible with Banner dc sensors with NPN or PNP output with a 4- or 5-pin Euro-style quick-disconnect (except NAMUR sensors). Minimum of 630V isolation from earth ground to dc output of circuit.

English

Data Sheets

Document Name Part Number File Size Action
1. PS15-1 Power Supply Module 03317 219K Download
2. PS24-1 123566 698K Download
3. PSDINA-24-4 DIN-Mount Power Supply 134840 376K Download
4. SPS101 DC Sensor Power Supply 66959 462K Download

Sign up for eNews

Industry solutions, application tips, new products, quick video tutorials, trends.

Subscribe Now »

Worldwide Distributors

Banner has more than 2,000 distributors worldwide - ready to help you. Enter a U.S. zip code


Find international distributors