| Supply Voltage and Current | 12 to 30V dc (10% max. ripple)
Less than 60 mA @ 12V dc (exclusive of load)
Less than 40 mA @ 30V dc (exclusive of load)
AS-i Compatible
|
| Supply Protection Circuitry | Protected against reverse polarity and transient voltages
|
| Output Configuration | NPN (current sinking) or PNP (current sourcing), depending on model
|
| Output Rating | 150 mA max.
ON-state saturation voltage:less than 2V at 10 mA dc; less than 2.5V at 150 mA dc
OFF-state leakage current:less than 1 µA @ 30V dc
|
| Output Protection Circuitry | Protected against false pulse on power-up and continuous overload or short circuit of outputs
|
| Output Response Time | 3 milliseconds ON/OFF
|
| Indicators | Entire translucent dome provides indicator light; either Job or Pick Sensed indicator inhibits the other light, depending on model
Job indicator:Green
Pick Sensed indicator:Red or no indicator, depending on model
|
| Job Light Enable | Input Impedance:800 ohms
Sinking:Input low less than 1.5V
Sourcing:Input high greater than 7V
|
| Construction | Base:nylon
Lens:polycarbonate or acrylic
Translucent dome:polycarbonate
|
| Environmental Rating | Fully encapsulated, IEC IP67
|
| Connections | 4-wire 2 m PVC-jacketed attached cable, 4-pin integral Euro-style quick-disconnect fitting (Q) or 150 mm pigtail with 4-pin Euro-style quick-disconnect fitting (QP). QD cables are ordered separately.
|
| Ambient Light Immunity | Up to 5,000 lux.
|
| EMI/RFI Immunity | Immune to EMI and RFI noise sources, per IEC 947-5-2
|
| Operating Conditions | Temperature:-20 to +50° C
Relative humidity:90% @ 50° C (non-condensing)
|