WORLD-BEAM QS30 Background Suppression

Online Learning Contact a Banner Engineer About Your Application
Product image

Overview

  • For reliably detecting objects in a defined sensing field while ignoring objects beyond cutoff point
  • 30 mm threaded barrel or right-angle mounting options
  • Range of supply voltages:
    • Adjustable-field models with 10 to 30V dc and bipolar NPN/PNP outputs
    • Fixed-field models with either 10 to 30V dc and bipolar NPN/PNP outputs or 12 to 250V ac/24 to 250V dc and SPDT electromechanical relay output
  • Push-button SET adjustable-field models with cutoff point from 50 to 300 mm
  • Preprogrammed fixed-field models with 200, 400 or 600 mm cutoff
  • Powerful highly collimated visible red sensing beam
  • Bright LED operating status indicators visible from 360°

Product Specifications

Supply Voltage and CurrentFixed-field (DC):10 to 30V dc (10% max. ripple) @ less than 40 mA (exclusive of load)

Fixed-field (AC/DC):24 to 250V ac, 50/60 Hz or 12 to 250V dc (1.0 watt max.)

Adjustable-field:10 to 30V dc (10% max. ripple within specified limits) at < 80 mA at 10V dc; < 40 mA at 30V dc
RangeFixed-field:200, 400 or 600 mm cutoff, depending on model

Adjustable-field:adjustable between 50-600 mm
Supply Protection CircuitryProtected against reverse polarity, over voltage and transient voltages
Output ConfigurationDC models:

Bipolar: One NPN (current sinking) and one PNP (current sourcing); light operate (LO) or dark operate (DO) selectable or configurable, depending on model

AC/DC models:SPDT (Single-Pole Double-Throw) electromechanical relay output
Output RatingFixed-field (DC):

- 100 mA max. each output @ 25° C

- OFF-state leakage (NPN):less than 200 µA @ 30V dc

- OFF-state leakage (PNP):less than 10 µA

- ON-state saturation voltage (NPN):less than 1.6V @ 100 mA

- ON-state saturation voltage (PNP):less than 2.0V @ 100 mA

Fixed-field (AC/DC):

- Max. switching power (resistive load):150 W, 1250 VA

- Max. switching voltage (resistive load):250V ac; 125V dc

- Max. switching current (resistive load):5 A @ 250V ac; 5 A @ 30V dc derated to 200 mA @ 125V dc

- Min. voltage and current:5V dc, 10 mA

- Mechanical life of relay:50 million operations

- Electrical life of relay at full resistive load:100,000 operations

Adjustable-field:

- 100 mA max. load (derate approximately 1 mA/° C above 30° C)

- OFF-stage leakage current:less than 5 µA @ 30V dc

- ON-stage saturation voltage (NPN):less than 1.5V @ 100 mA

- ON-state saturation voltage (PNP):less than 2.0V @ 100 mA
Output Protection CircuitryDC models:Protected against output short-circuit, continuous overload, transient over-voltages and false pulse on power-up
Output Response TimeFixed-field (DC):2 milliseconds ON/OFF; 100 ms delay on power-up; outputs do not conduct during this time

Fixed-field (AC/DC):15 milliseconds ON/OFF; 100 ms delay on power-up; outputs do not conduct during this time

Adjustable-field: 5 millisecond ON/OFF; 200 ms delay on power-up; outputs do not conduct during this time
RepeatabilityFixed-field (DC):500 microseconds

Adjustable-field:750 microseconds
AdjustmentsFixed-field (DC):

Light operate:High (open or 5 to 30V)*

Dark operate: Low (0 to 3V)*

Adjustable-field: Four-turn adjustment screw sets cutoff distance between min. and max. positions, clutched at both ends of travel
IndicatorsLarge, oval LED indicator on back:

* Yellow ON steady: output conducting

2 LED indicator on top: Green and Yellow

* Green ON steady: power ON

* Yellow ON steady: light sensed

* Yellow flashing:marginal excess gain (1.0-1.5x excess gain)

Adjustable-field:

2 Indicator LEDs on sensor top:

* Green ON steady: Power ON

* Yellow ON steady: Light sensed (excess gain > 1.5x)

* Yellow flashing: Marginal sensing condition (excess gain < 1.5x)

2 Indicator LEDs on sensor back:

* Small Blue/Red End-of-travel (EOT) LED

* Large Yellow Output LED
ConstructionFixed Field:

PC/ABS housing with acrylic lens cover

Adjustable-field:

ABS housing, acrylic lens cover; 2.5 mm and 3 mm mounting hardware included



QD models: nickel-plated brass
Environmental RatingIP67; NEMA 6
ConnectionsDC models:5-conductor 2 m or 9 m attached PVC cable, or 4-pin Euro-style quick-disconnect fitting. QD cables are ordered separately.

AC/DC models:2 m or 9 m 5-wire PVC cable

Adjustable-field: 2 m (6.5') 5-wire PVC cable, 9 m (30') PVC cable, or 5-pin Integral QD or Euro-style 150 mm (6 in.) pigtail QD, depending on model
Operating ConditionsFixed-field:

Temperature:-20 to +70° C

Relative humidity:90% @ 50° C (non-condensing)

Adjustable-field:

Temp: –20° to +60° C (–4° to 140° F)

Relative Humidity: 95% @ 50° C (non-condensing)
Vibration and Mechanical ShockDC models:All models meet Mil. Std. 202F requirements. Method 201A (Vibration; frequency 10 to 60 Hz max., double amplitude 0.06-inch acceleration 10G). Also meets IEC 947-5-2 requirements: 30G, 11 milliseconds duration, half-sine wave.
CertificationsAdjustable-field: CE

AC/DC: UL, cULus Listed

English

Data Sheets

Document Name Part Number File Size Action
1. WORLD-BEAM QS30 Adjustable-Field Sensors with Background Suppression 148757 874K Download
2. WORLD-BEAM QS30 Adjustable-Field Series 111384 561K Download

Installation Guides

Document Name Part Number File Size Action
1. WORLD-BEAM QS30 Series, ac/dc models 119168 310K Download

Product Brochures

Document Name Part Number File Size Action
1. Adjustable-Field Sensors Flyer 153639 2.5MB Download

French

Data Sheets

Document Name Part Number File Size Action
1. QS30AF Background Suppr - French FD230 2.5MB Download

German

Data Sheets

Document Name Part Number File Size Action
1. QS30AF Background Suppr - German GD230 2.5MB Download

Italian

Data Sheets

Document Name Part Number File Size Action
1. QS30AF Background Suppr - Italian ID230 2.5MB Download

Sign up for eNews

Industry solutions, application tips, new products, quick video tutorials, trends.

Subscribe Now »

Worldwide Distributors

Banner has more than 2,000 distributors worldwide - ready to help you. Enter a U.S. zip code


Find international distributors