Q45 AC Series

Online Learning Contact a Banner Engineer About Your Application
Product image

Overview

  • 90 to 250V ac supply voltage with SPST solid-state or SPDT electromechanical relay output
  • Available in opposed, polarized and non-polarized retroreflective, convergent, diffuse, and glass or plastic fiber optic sensing modes
  • Accommodates output timing logic or 7-segment LED signal strength display
  • Ranges up to 60 m
  • 30 mm threaded mounting base

Product Specifications

Supply Voltage and Current90 to 250V ac (50/60 Hz) Average current:20 mA
Peak current:50 mA @ 120V ac, 750 mA @ 250V ac
RangeOpposed:60 m
Diffuse (long range):1.8 m
Diffuse (short range):450 mm
Diffuse (high power):3 m
Non-polarized Retroreflective:0.08 to 9 m, range is specified using one model BRT-3 retroreflector
Polarized Retroreflective:0.15 to 6 m, range is specified using one model BRT-3 retroreflector
Convergent:38 or 100 mm, depending on model
Plastic and Glass Fiber Optic:Range varies by sensing mode and fiber optics used
Supply Protection CircuitryProtected against transient voltages
Output ConfigurationQ45VR2 models (except emitters):SPDT (single-pole double-throw) electromechanical relay output
Q45BW22 models:Short circuit /overload protected FET solid-state relay
Output RatingQ45VR2 models:
Max. switching power (resistive load):150W, 600 VA
Max. switching voltage (resistive load):250V ac or 30V dc
Max. switching current (resistive load):5A @ 250V ac
Min. voltage and current:5V dc, 0.1 mA
Mechanical life of relay:10,000,000 operations
Electrical life of relay at full resistive load:10,000 operations
Q45BW22 models:
Continuous current:300 mA max. to 50° C (derate to 200 mA @ 70° C, 5 mA/° C)
Inrush current:3A max. for 100 milliseconds, 5A max. for 1 millisecond
OFF-state leakage current: less than 100 µA
Saturation voltage:less than 3V @ 200 mA
Output Response TimeResponse time is independent of signal strength. Q45VR2 models:15 milliseconds ON/OFF
Q45BW22 models:
Opposed:2 milliseconds ON; 1 milliseconds OFF
All others:2 milliseconds ON/OFF
Delay at Power-up100 milliseconds; outputs do not conduct during this time.
RepeatabilityRepeatability is independent of signal strength. Opposed:0.25 milliseconds
All others:0.5 milliseconds
AdjustmentsLight-operate/dark-operate select switch and multi-turn sensitivity control on top of sensor, beneath a transparent polycarbonate o-ring sealed cover, allows precise sensitivity setting (turn clockwise to increase gain). Optional logic and logic/display modules have adjustable timing functions.
IndicatorsIndicator LEDs are highly visible, located beneath a raised transparent polycarbonate dome on top of the sensor. Power (Green):LED lights whenever 90 to 250V ac power is applied and flashes to indicate ouput overload or output short circuit
Signal (Red):LED lights whenever the sensor sees its modulated light source and pulses at a rate proportional to the strength of the received light signal
Load (Yellow):LED lights whenever an output relay is energized
Optional 7-segment display:LED display lights for signal strength
ConstructionMolded reinforced thermoplastic polyester housing, o-ring sealed transparent polycarbonate cover, molded acrylic lenses and stainless-steel hardware. Q45s are designed to meet 1200 psi washdown. The base of cabled models has a 1/2 inch NPS integral internal conduit thread.
Environmental RatingNEMA 6P; IEC IP67
ConnectionsQ45VR2 models:PVC-jacketed 2-wire (emitters) or 5-wire (all others) 2 m or 9 m cables, or 3-pin (emitters) or 5-pin integral Mini-style QD (Q). QD cable are ordered separately.
Q45BW22 models:PVC-jacketed 2 m or 9 m cables, or 3-pin integral Mini-style QD (Q), or 4-pin integral Micro-style QD (Q1), depending on model. QD cable are ordered separately.
Operating ConditionsTemperature:-40° to +70° C
Relative humidity:90% @ 50° C (non-condensing)
Application NoteTransient suppression is recommended for contacts switching inductive loads. Optional logic timing modules are available.

English

Data Sheets

Document Name Part Number File Size Action
1. Q45 Series, ac models
(Electromechanical Relay Output)		 36339 731K Download
2. Q45 Series, ac models
(Solid-State Outputs)		 37209 724K Download
3. Q45 Series, Plug-in Logic and Display Modules
(45LM)		 63416 232K Download
4. Q45 Series, Plug-in Logic and Display Modules
(45LM..)		 37250 117K Download

Installation Guides

Document Name Part Number File Size Action
1. Q45 Series, ac models
(Solid-State Output)-Multilingual		 53852 2.3MB Download

French

Installation Guides

Document Name Part Number File Size Action
1. Q45 Series, ac models
(Electromechanical Relay Output)-Multilingual		 53856_FR 2.3MB Download

German

Installation Guides

Document Name Part Number File Size Action
1. Q45 Series, ac models
(Electromechanical Relay Output)-Multilingual		 53856_DE 2.3MB Download

Italian

Installation Guides

Document Name Part Number File Size Action
1. Q45 Series, ac models
(Electromechanical Relay Output)-Multilingual		 53856_IT 2.3MB Download

Japanese

Installation Guides

Document Name Part Number File Size Action
1. Q45 Series, ac models
(Electromechanical Relay Output)-Multilingual		 53856_JP 2.3MB Download

Spanish

Installation Guides

Document Name Part Number File Size Action
1. Q45 Series, ac models
(Electromechanical Relay Output)-Multilingual		 53856_ES 2.3MB Download

United Kingdom

Installation Guides

Document Name Part Number File Size Action
1. Q45 Series, ac models
(Electromechanical Relay Output)-Multilingual		 53856 2.3MB Download

Sign up for eNews

Industry solutions, application tips, new products, quick video tutorials, trends.

Subscribe Now »

Food & Beverage

Is your line competitive? Innovative, high-quality solutions for every phase of production. Enjoy increased accuracy, greater productivity, cost savings.

Learn more »

Worldwide Distributors

Banner has more than 2,000 distributors worldwide - ready to help you. Enter a U.S. zip code


Find international distributors