U-GAGE Q45UR Series—Discrete

Online Learning Contact a Banner Engineer About Your Application
Product image

Overview

  • Uses one of three available remote sensing heads for precision sensing in hard-to-access or difficult applications
  • Offers 12 to 24V dc supply voltage with bipolar NPN or PNP output
  • Senses a range of 50 to 250 mm
  • Offers ON/OFF mode for detecting when the target is within the set range or when it is outside the range
  • Features programmable response speed of 40 or 160 milliseconds with switches
  • Offers 0.6 mm resolution
  • Simplifies setup with push-button TEACH programming of near/far limits of the sensing window
  • Includes built-in temperature compensation on remote sensing head and an operating temperature range of -25° to 70° C
  • Provides digital filtering for exceptional electrical and noise immunity

Product Specifications

Supply Voltage and Current12 to 24V dc (10% max. ripple) @ 100 mA (exclusive of load)
Range50 to 250 mm
Ultrasonic Frequency400 kHz
Supply Protection CircuitryProtected against reverse polarity and transient voltages
Output ConfigurationBipolar:One NPN (current sinking) and one PNP (current sourcing)
Output Rating150 mA max. each output OFF-state leakage current:less than 25 µA @ 24V dc
ON-State saturation voltage:less than 1.5V @ 10 mA; less than 2.0V @ 150 mA
Output Protection CircuitryProtected against continuous overload or short-circuit of outputs
Output Response Time40 or 160 milliseconds selectable using switches
Repeatability±0.2% of measured distance, specified using a 50 x 50 mm aluminum plate at 22° C under fixed sensing conditions.
Temperature Stability±0.03% of the window limit positions per ° C from 0° to 50° C (±0.05% per ° C over remainder of operating temperature range)
Sensing Window Width5 to 200 mm, when independent near and far limits are taught; 1, 2, 3 or 4 mm (switch selectable), when a sensing distance setpoint is taught
Hysteresis0.5 mm
Ultrasonic Beam Angle±3.5°
AdjustmentsThe following may be selected by a 4-position DIP switch located on top of the sensor, beneath a transparent o-ring sealed acrylic cover: Switch 1:output normally open (output is energized when target is within sensing window limits), or normally closed (output is energized when target is outside sensing window limits)
Switch 2 & 3:sensing window size (1, 2, 3 or 4 mm)
Switch 4:response speed selection (40 or 160 milliseconds)
Indicators5-segment moving dot LED indicates the position of the target within the sensing window 3 LED indicators:Green, Yellow and Red
Green ON steady:power to controller is ON
Green flashing:output is overloaded
Yellow ON steady:outputs are conducting (yellow also indicates programming status during setup)
Red flashing:indicates relative signal strength of received echo
ConstructionController:Molded thermoplastic polyester housing, o-ring sealed transparent acrylic top cover, and stainless-steel hardware
Sensors:
M18C2.0:Stainless-steel M18 threaded barrel housing and jam nuts, polyetherimide front cover, ceramic transducer, polyurethane rear cover
S18C2.0:Thermoplastic polyester S18 threaded barrel housing and jam nuts, polyetherimide front cover, ceramic transducer, polyurethane rear cover
Q13C2.0:Molded 30% glass reinforced thermoplastic polyester housing, ceramic transducer, fully epoxy-encapsulated
Environmental RatingController:IEC IP67; NEMA 6P
Sensors:IEC IP65; NEMA 4
ConnectionsController:5-conductor 2 m or 9 m shielded PVC-jacketed attached cable, or 5-pin Euro- or Mini-style quick-disconnect fitting. QD cables are ordered separately.
Sensors:2 m PVC-jacketed attached cable terminated with 4-pin Euro-style quick-disconnect fitting for connection to controller.
Operating ConditionsTemperature:-25° to +70° C
Relative humidity:85% (non-condensing)
Vibration and Mechanical ShockAll models meet Mil. Std. 202F requirements. Method 201A (Vibration: 10 to 60 Hz max. double amplitude 0.06”, maximum acceleration 10G). Method 213B conditions H&I (Shock: 75G with unit operating; 100G for non-operation). Also meets IEC 947-5-2 requirements: 30G, 11 milliseconds duration, half-sine wave.
Application Notes• The TEACH-mode function of the controller is used to set the sensing distance setpoint. The sensing window size is set using DIP switches #2 and #3. The sensing distance setpoint is centered within the sensing window. The size of the sensing window may be adjusted at any time, with or without power applied, and without re-teaching the sensing distance setpoint.

• The controller has non-volatile memory which remembers the last sensing distance setpoint setting if power is removed and later reapplied.

• The sensing distance setpoint may be programmed using the Remote TEACH input (see hookup diagrams).

• Acceptable target angle is within ±5° of normal for a smooth, flat target; target rotation does affect the apparent target location with respect to the sensor.

English

Data Sheets

Document Name Part Number File Size Action
1. U-GAGE Q45UR Remote Ultrasonic Series, Analog Output 59323 933K Download
2. U-GAGE Q45UR Remote Ultrasonic Series, Discrete Outputs 59321 675K Download

Product Brochures

Document Name Part Number File Size Action
1. U-GAGE Ultrasonic Sensors 113372 2.6MB Download
2. Ultrasonic Solutions Flyer 142025 1.7MB Download

Dutch

Installation Guides

Document Name Part Number File Size Action
1. U-GAGE Q45UR Remote Ultrasonic Series, Analog Output - Dutch DD048 523K Download
2. U-GAGE Q45UR Remote Ultrasonic Series, Discrete Outputs - Dutch DD049 515K Download

French

Installation Guides

Document Name Part Number File Size Action
1. U-GAGE Q45UR Remote Ultrasonic Series, Analog Output - French FD048 524K Download
2. U-GAGE Q45UR Remote Ultrasonic Series, Discrete Outputs - French FD049 516K Download

German

Installation Guides

Document Name Part Number File Size Action
1. U-GAGE Q45UR Remote Ultrasonic Series, Analog Output - German GD048 523K Download
2. U-GAGE Q45UR Remote Ultrasonic Series, Discrete Output - German GD049 516K Download

Italian

Installation Guides

Document Name Part Number File Size Action
1. U-GAGE Q45UR Remote Ultrasonic Series, Analog Output - Italian ID048 523K Download
2. U-GAGE Q45UR Remote Ultrasonic Series, Discrete Outputs - Italian ID049 515K Download

Japanese

Data Sheets

Document Name Part Number File Size Action
1. U-GAGE Q45UR Remote Ultrasonic Series, Analog Outputs - Japanese J20002M 857K Download
2. U-GAGE Q45UR Remote Ultrasonic Series, Discrete Outputs - Japanese J20001M 728K Download

Portuguese

Data Sheets

Document Name Part Number File Size Action
1. U-GAGE Q45UR Remote Ultrasonic Series, Analog Output - Portuguese PD048 476K Download
2. U-GAGE Q45UR Remote Ultrasonic Series, Discrete Output - Portuguese PD049 471K Download

Spanish

Data Sheets

Document Name Part Number File Size Action
1. U-GAGE Q45UR Remote Ultrasonic Series, Analog Outputs - Spanish SD048 383K Download
2. U-GAGE Q45UR Remote Ultrasonic Series, Discrete Outputs - Spanish SD049 515K Download

United Kingdom

Data Sheets

Document Name Part Number File Size Action
1. U-GAGE Q45UR Remote Ultrasonic Series, Analog Output - UK English ED048 523K Download
2. U-GAGE Q45UR Remote Ultrasonic Series, Discrete Output - UK English ED049 517K Download

Sign up for eNews

Industry solutions, application tips, new products, quick video tutorials, trends.

Subscribe Now »

Food & Beverage

Is your line competitive? Innovative, high-quality solutions for every phase of production. Enjoy increased accuracy, greater productivity, cost savings.

Learn more »

Worldwide Distributors

Banner has more than 2,000 distributors worldwide - ready to help you. Enter a U.S. zip code


Find international distributors