D10—Discrete
Overview
High-performance, low-contrast plastic fiber optic sensor with gain adjustment knob.
- 10 to 30V dc supply voltage with bipolar NPN or PNP outputs
- 14-turn potentiometer for manual adjustment of sensitivity
- LED pulse-rate indicator for signal strength
- Response time as fast as 200 microseconds
- Light- or dark-operate selectable
- Selection switch for 0 to 40 millisecond OFF-delay
Product Specifications
| Supply Voltage and Current | 10 to 30V dc (10% max. ripple) @ less than 25 mA (exclusive of load) |
|---|---|
| Range | Varies by sensing mode and fiber optics used |
| Supply Protection Circuitry | Protected against reverse polarity and transient voltage |
| Output Configuration | Bipolar:One NPN (current sinking) and one PNP (current sourcing) |
| Output Rating | 100 mA max. output with short-circuit protection
OFF-state leakage current:less than 10 µA sourcing; 200 µA sinking ON-state saturation voltage: NPN:1.6V @ 100 mA
PNP:2.0V @ 100 mA
|
| Output Protection Circuitry | Protected against output short-circuit and false pulse on power up |
| Output Response Time | Standard models:500 microseconds (with crosstalk avoidance circuitry) High-speed models:200 microseconds |
| Delay at Power-up | 100 millisecond; outputs do not conduct during this time. |
| Repeatability | Standard models:95 microseconds High-speed models:50 microseconds |
| Adjustments | 12-turn Sensitivity potentiometer with relative position indicator; light operate (LO)/dark operate selection switch; 0 or 40 milliseconds OFF-delay switch NOTE: Use proper ESD techniques while making adjustments under cover. |
| Indicators | 2 LED Indicators:Green and Yellow Green ON steady:power ON
Yellow ON steady:light sensed signal strength indicator (Banner's Aid Alignment Indicator Device—the faster the flash, the more light is received)
|
| Construction | Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover. |
| Environmental Rating | NEMA 1; IEC IP50 |
| Connections | PVC-jacketed 2 m or 9 m attached cable or integral 4-pin Pico-style QD. QD cables are ordered separately. |
| Operating Conditions | Temperature:-10° to +55° C Storage Temperature:-20° to +85° C Relative humidity:90% @ 50° C |
| Installation | 35 mm DIN rail or included mounting bracket |
Banner Insider eNewsletter
Helpful application information, new product updates, answers to frequently asked questions, and more.
Subscribe Now »Food & Beverage
Is your line competitive? Innovative, high-quality solutions for every phase of production. Enjoy increased accuracy, greater productivity, cost savings.
Learn more »Worldwide Distributors
Banner has more than 2,000 distributors worldwide — ready to help you.
Find international distributors