D12 High-Speed Series
Overview
- Selectable 50 or 500 microsecond response time for high-speed applications
- 15-turn potentiometer for manual adjustment of sensitivity
- 10 to 30V dc supply voltage with NPN or PNP output, depending on model
- LED bargraph to show signal strength, sensing contrast, programming status and diagnostic warnings, when in 500 microsecond mode
- Available in glass and plastic fiber optic models
- Marginal gain indicator with alarm output, when in 500 microsecond mode
Product Specifications
| Supply Protection Circuitry | Protected against reverse polarity and transient voltage |
|---|---|
| Range | Range varies by sensing mode and fiber optics used |
| Supply Voltage and Current | 10 to 30V dc @ 45 mA max. (exclusive of load) |
| Output Configuration | NPN (current sinking) or PNP (current sourcing), depending on model
Complementary:one normally open (NO) and the other normally closed (NC) |
| Output Rating | 150 mA max. each output; total load may not exceed 150 mA
OFF-state leakage current:less than 10 µA @ 30V dc ON-state saturation voltage:less than 1V @ 10 mA dc; less than 1.5V @ 150 mA dc |
| Output Protection Circuitry | Protected against false pulse on power-up; short-circuit protected |
| Output Response Time | Selectable 50 or 500 microseconds ON/OFF |
| Output Timing Function | Y1 models have a fixed 20 millisecond OFF-delay when 50 microsecond mode is used |
| Delay at Power-up | 0.1 second; outputs do not conduct during this time. |
| Repeatability | 500 microseconds mode:130 microseconds 50 microseconds mode:15 microseconds |
| Adjustments | All models have a 15-turn sensitivity (Gain) control, clutched at both ends of travel and a response mode selector switch |
| Indicators | 2 LED Indicators:Green and Yellow Green ON steady:power ON
Yellow ON steady:normally open output conducting
7-segment Red bargraph (500 microseconds mode only):lights to indicate relative received light signal strengthSegment #1 Red flashing:output overload
Segment #7 Red flashing:marginal excess gain
|
| Mounting Bracket | D12 Sensors mount directly to a standard DIN rail, or may be through-hole mounted using the supplied mounting bracket and M3 x 0.5 hardware |
| Construction | Black ABS housing with acrylic cover, stainless-steel M3 x 0.5 hardware for use with thermoplastic polyester mounting bracket (supplied); the plastic fiber clamping element is Acetal |
| Environmental Rating | IEC IP66; NEMA 4 |
| Connections | PVC-jacketed 2 m or 9 m attached cables, or 150 mm pigtail with 4-pin Pico-style QD. QD cables are ordered separately. |
| Operating Conditions | Temperature:-20° to +70° C Relative humidity:90% @ 50° C (non-condensing) |
Banner Insider eNewsletter
Helpful application information, new product updates, answers to frequently asked questions, and more.
Subscribe Now »Food & Beverage
Is your line competitive? Innovative, high-quality solutions for every phase of production. Enjoy increased accuracy, greater productivity, cost savings.
Learn more »Worldwide Distributors
Banner has more than 2,000 distributors worldwide — ready to help you.
Find international distributors