D10 Expert with Bargraph Display & Bussable Power

Online Learning Contact a Banner Engineer About Your Application
Product image

Uses & Applications

Previous Next 1

Sensing in a High-Speed Chip Shooter

Overview

Bussable Power models with improved temperature compensation available for side-by-side mounting and simplified wiring of up to 16 sensors

  • 12 to 24V dc or 15 to 24V dc supply voltage with either an NPN or PNP discrete output, and a 4-20 mA current analog output or 0-10V dc voltage analog output, depending on model
  • Digital display of signal strength and operating status
  • Push-button for easy-to-set static, dynamic or single-point programming
  • Manual adjustment for fine tuning
  • Light- or dark-operate selectable
  • Four-mode power and speed selection with automatic crosstalk avoidance circuitry
  • Response time as fast as 50 microseconds
  • Visible red sensing beam

Product Specifications

Sensing Beam660 nm visible red
Supply Voltage12 to 30V dc (10% max. ripple) @ less than 45 mA

exclusive of load
Supply Protection CircuitryProtected against reverse polarity and transient voltage
Delay at Power Up850 milliseconds max.; outputs do not conduct during this

time
Output ConfigurationMain Units:Bipolar; 1 current sourcing (PNP) and 1
Sub-units:1 current sourcing (PNP) or 1 current sinking
Output Rating100 mA max. load (derate 1 mA per °C above 30° C) OFF-state leakage current:< 5 μA at 30V dc
ON-state saturation voltage:
NPN:< 1.5V
PNP:< 2V
Supply 15V or more:up to 16 units with 100 mA outputs
Less than 15V supply (9 m cable):up to 4 units with 100 mA outputs, up to 8 units with 50 mA outputs
Output ProtectionProtected against false pulse on power-up and continuous short-circuit
Output Response Time500 microseconds (normal mode) or 200 microseconds (high-speed mode)
Repeatability100 microseconds (normal mode) or 66 microseconds (high-speed mode)
AdjustmentsTwo push buttons and remote wire Push buttons or remote wire:Expert TEACH programming (two-point static, dynamic and single-point static), light operate (LO)/dark operate (DO), OFF-delay and response speed
Push button only:Manually adjust (+/-) sensitivity
Remote wire only:Push-button lockout
Indicators8-segment Red bargraph:Light-to-dark signal difference relative to taught condition (single-point TEACH )
Green status indicators:LO, DO, High Speed and OFF-delay
Green LED:Power ON
Yellow LED:Output conducting
ConstructionBlack ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover.
Environmental RatingNEMA 1; IEC IP50
ConnectionsMain units:PVC-jacketed 2 m or 9 m (6.5' or 30')
Sub-units:PVC-jacketed 2 m or 9 m (6.5' or 30')
Operating ConditionsTemperature:-10° to +55° C
Storage Temperature:-20° to +85° C
Relative humidity:90% @ 50° C

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

"No more costly wiring runs"

“I’m delighted with Banner’s SureCross wireless system. It gives us comprehensive monitoring and control in previously inaccessible locations. And it’s easy to expand and relocate as needed.”

Worldwide Distributors

Banner has more than 2,000 distributors worldwide — ready to help you.

Find international distributors