SM30 Standard Series

Online Learning Contact a Banner Engineer About Your Application
Product image

Overview

  • Features EZ-BEAM technology, with specially designed optics and electronics for reliable sensing without adjustments
  • Completely epoxy-encapsulated for superior durability, even in harsh sensing environments
  • Features 30 mm plastic threaded barrel
  • Operates in opposed mode with a 60 m range
  • Uses innovative dual-indicator system to take the guesswork out of monitoring sensor performance
  • Available in 10 to 30V dc with NPN or PNP output, or 20-250V ac with SPST solid-state output
  • Includes advanced diagnostics to warn of marginal sensing conditions or output overload (dc models)

Product Specifications

Supply Voltage and CurrentDC models:10 to 30V dc (10% max. ripple)
Emitters:25 mA (exclusive of load)
Receivers:20 mA (exclusive of load)
AC models:20 to 250V ac (50/60 Hz)
Average Current:20 mA
Peak current:200 mA @ 20V ac, 500 mA @ 120V ac, 750 mA @ 250V ac
Range60 m
Supply Protection CircuitryDC models:Protected against reverse polarity and transient voltages
AC models:Protected against transient voltages
Output ConfigurationDC models:
Solid-state complementary (SPDT) dc switch::NPN (current sinking) or PNP (current sourcing), depending on model. The dark operate (DO) output may be wired as a normally open marginal signal alarm output, depending upon hookup to the power supply.
AC models:
SPST solid-state ac switch; three-wire hookup:Light operate (LO) or dark operate (DO), depending on model
Light operate:Output conducts when the sensor sees its own (or the emitter’s) modulated light
Dark operate:Output conducts when the sensor sees its own (or the emitter’s) modulated light
Output RatingDC models:150 mA max. (each) in standard hookup. When wired for alarm output, the total load may not exceed 150 mA
OFF-state leakage:less than 1 µA @ 30V dc
ON-state saturation voltage:less than 1V @ 10 mA dc; less than 1.5V @ 150 mA dc
AC models:300 mA max. (continious)
Inrush capability:1 A for 20 milliseconds, non-repetitive
OFF-state leakage current:less than 100 µA
ON-state voltage drop:3V @ 300 mA ac; 2V @ 15 mA ac
Output Protection CircuitryDC models:Protected against false pulse on power-up and continuous overload or short circuit of outputs
AC models:Protected against false pulse on power-up
Output Response TimeResponse time is independent of signal strength. DC models:3 milliseconds ON; 1.5 milliseconds OFF
AC models:16 milliseconds ON; 8 milliseconds OFF
Delay at Power-upDC models:100 milliseconds; outputs do not conduct during this time.
AC models:100 milliseconds
RepeatabilityRepeatability is independent of signal strength. DC models:375 microseconds
AC models:2 milliseconds
IndicatorsDC models, 2 LED Indicators:Green and Yellow
Green ON steady:power to sensor is ON
Green flashing:output is overloaded
Yellow ON steady:light-operate (LO) output is energized
Yellow flashing:marginal excess gain (1-1.5x) in light condition, LO output is energized
AC models, 2 LED Indicators:Green and Yellow
Green ON steady:power to sensor is ON
Yellow ON steady:sensor sees light
Yellow flashing:marginal excess gain (1-1.5x) in light condition
ConstructionThermoplastic polyester housing with polycarbonate or acrylic lenses. Two jam nuts are included with each sensor.
Environmental RatingLeakproof design rated NEMA 6P; DIN 40050 (IP69K)
ConnectionsDC models:2 m or 9 m attached cable, or 4-pin Euro-style quick-disconnect fitting. QD cables are ordered separately.
AC models:2 m or 9 m attached cable, or 4 pin Micro-style quick-disconnect fitting. QD cables are ordered separately.
Operating ConditionsTemperature:-40° to +70° C
Relative humidity:90% @ 50° C (non-condensing)
Vibration and Mechanical ShockAll models meet Mil. Std. 202F requirements. Method 201A (Vibration; frequency 10 to 60 Hz, max., double amplitude 0.06-inch acceleration 10G). Method 213B conditions H&I (Shock: 75G with unit operating; 100G for non-operation)

English

Data Sheets

Document Name Part Number File Size Download
1. SM30 Series, ac models 34428 61K Download
2. SM30 Series, dc models 34328 68K Download

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

Looking for CAD Files?

Browse by model family or type in your model number to find STEP, IGS, DXF, or PDF files for your project.

Find them now »

Worldwide Distributors

Banner has more than 3,000 distributors worldwide — ready to help you. Enter a U.S. zip code

Find international distributors