R58A Registration Mark Sensors

Online Learning Contact a Banner Engineer About Your Application

Overview

  • High-performance registration mark sensing with simplified set-up and sensor adjustment
  • Choice of red or green LEDs by model
  • Easy selection of Light/Dark Operate (LO/DO) by selection switch
  • Parallel or perpendicular sensing image, depending on model
  • 20 millisecond OFF-delay by model
  • Potentiometer-adjusted switching threshold with two green LEDs to assist in setting optimal threshold

Product Specifications

Supply Voltage and Current10 to 30V dc (10% max. ripple within specified voltage range); 36 mA exlusive of load
Supply Protection CircuitryProtected against reverse polarity and transient voltages
Output ConfigurationBipolar; one current sourcing (PNP) and one current sinking (NPN)
Output Rating150 mA max. (each output) Off-state leakage current:<10 microamps
NPN saturation:< 200 mV at 10 mA and < 1.0V at 150 mA
PNP saturation:< 1V at 10 mA and < 2.0V at 150 mA
Output Protection CircuitryProtected against false pulse on power-up and continuous overload or short-circuit of outputs
Output Response Time50 microseconds: 100 millisecond delay on power-up (outputs do not conduct)
Repeatability15 microseconds
Sensing ImageRectangular: 1.2 mm x 3.8 mm (0.05
AdjustmentsLight/Dark Operate (LO/DO) select switch, and 15-turn switchpoint adjustment potentiometer
Indicators1 Amber:Output active
2 Green:Switchpoint threshhold adjustment indicators
ConstructionHousing:Zinc alloy die-cast housing with black painted finish and o-ring sealed lens port cap
Lens:Acrylic
Lens port cap and lens holder:ABS
Sensitivity and LO/DO adjusters:Acetal
QD:Anodized aluminum
Environmental RatingIEC IP67; NEMA 6
ConnectionsPVC-jacketed 4-conductor 2 m (6.5'); 9 m (30') attached cable; integral 4-pin Euro-style QD fitting; or 150 mm (6
Operating ConditionsTemperature:10° to 50° C (+14° to 131° F)
Storage Temperature:-20° to 80° C (-4° to 185° F)
Maximum relative humidity:90% at 50°C (non-condensing)
Vibration and ShockAll models meet IEC 68-2-6 and IEC 68-2-27 testing criteria
Application Notes1:Do not mount the sensor directly perpendicular to shiny surfaces; position it at approximately 15 angle in relation to the sensing target.
2:Minimize web or product
3:The lens may be installed in either of the two lens ports. The lens port cap must be installed on the unused port for reliable operation.

English

Data Sheets

Document Name Part Number File Size Download
1. R58A Series Registration Mark Sensors 144736 1.5MB Download

Product Brochures

Document Name Part Number File Size Download
1. R58 Registration Mark Sensor Flyer 128094 645K Download

French

Data Sheets

Document Name Part Number File Size Download
1. R58A - French FD211-R58A 1.5MB Download

German

Data Sheets

Document Name Part Number File Size Download
1. R58A - German GD211-R58A 1.5MB Download

Italian

Data Sheets

Document Name Part Number File Size Download
1. R58A - Italian ID211-R58A 1.5MB Download

Japanese

Data Sheets

Document Name Part Number File Size Download
1. R58A Series Registration Mark Sensors - Japanese JP144736 1.6MB Download

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

Food & Beverage

Is your line competitive? Innovative, high-quality solutions for every phase of production. Enjoy increased accuracy, greater productivity, cost savings.

Learn more »

Worldwide Distributors

Banner has more than 3,000 distributors—ready to help you. Enter your U.S. city or zip.


Find international distributors