WORLD-BEAM QS18 Laser Series

Online Learning Contact a Banner Engineer About Your Application
Product image

Overview

  • High-performance sensing with visible Class 1 or Class 2 lasers, depending on model
  • Available in opposed, diffuse, retroreflective and adjustable-field sensing modes
  • 10 to 30V dc supply voltage with NPN or PNP output, depending on model
  • Long sensing ranges
  • Ideal for confined areas
  • Available with five beam shapes
  • Narrow effective beam for small object detection and precise position control
  • Bright LED status indicators with 360° visibility

Product Specifications

Supply Voltage and Current10 to 30V dc (10% max. ripple) Laser Emitters:less than 35 mA (exclusive of load)
All others:less than 15 mA (exclusive of load)
RangeLaser Emitter:15 m (4500 X excess gain)
Laser Polarized Retroreflective:10 m, range is specified using one model BRT-51X51BM or BRT-TVHG-2X2 retroreflector
Laser Diffuse:300 mm
Class 1 Laser Adjustable-field:1 mm to cutoff point (adj. between 30-150 mm)
Class 2 Laser Adjustable-field:20 mm to cutoff point (adj. between 50-250 mm)
Laser CharacteristicsWavelength:
Class 2 Laser Adjustable-field:658 nm visible Class 2 laser
All others:650 nm visible red Class 1 laser
Pulse width:
Laser Emitters:5 microseconds
All others:7 microseconds
Rep. rate:
Laser Emitters:27 microseconds
All others:130 microseconds
Pulse output power:
Laser Emitters:less than 1.9 mW
All others:0.065 mW
Supply Protection CircuitryProtected against reverse polarity and transient voltages
Laser ControlEnable beam by applying 0V dc to white wire; apply +10 to 30V dc to white wire to inhibit (extinguish) beam
Output ConfigurationSolid-state complementary (SPDT):NPN (current sinking) or PNP (current sourcing), depending on model
Output Rating100 mA max. each @ 25° C OFF-state leakage current:
NPN:less than 200 µA @ 30V dc
PNP:less than 10 µA @ 30V dc
ON-state saturation voltage:
NPN:less than 1.6V @ 100 mA
PNP:less than 2.0V @ 100 mA
Output Protection CircuitryProtected against false pulse on power-up and continuous overload or short circuit of outputs
Output Response Time700 microseconds ON/OFF (except Laser Emitters)
Delay at Power-upLaser Emitters:1.5 seconds
All others:200 milliseconds; outputs do not conduct during this time.
Repeatability130 microseconds (except Laser Emitters)
Sensing HysteresisLaser Retroreflective:12% of range typical
Laser Diffuse:15% of range typical
Class 1 Laser Adjustable-field:1% of range typical @ 30 mm cutoff; 2% of range typical @ 75 mm cutoff; 5% of range typical at 150 mm cutoff
Class 2 Laser Adjustable-field:1% of range typical @ 50 mm cutoff; 2% of range typical @ 150 mm cutoff; 5% of range typical at 250 mm cutoff
AdjustmentsLaser Retroreflective and Laser Diffuse:Single-turn sensitivity (Gain) adjustment potentiometer
Class 1 Laser Adjustable-field:Five-turn adjustment screw sets cutoff distance between 30 and 150 mm, clutched at both ends of travel
Class 2 Laser Adjustable-field:Five-turn adjustment screw sets cutoff distance between 50 and 250 mm, clutched at both ends of travel
ConstructionABS housing with acrylic lens cover. 2.5 mm (laser adjustable-field) and 3 mm mounting hardware is included with each sensor.
IndicatorsLaser Emitters, 1 LED indicator:
Green ON steady:power applied
All others, 2 LED Indicators:
Green ON steady:power ON
Green flashing:output overload
Yellow† ON steady:light sensed
Yellow† flashing:marginal excess gain (1.0-1.5x excess gain) in light condition
†Note::Prior to date code 0223, the output indicator was red instead of yellow.
Environmental RatingIEC IP67; NEMA 6
Connections2 m or 9 m 4-wire attached PVC cable, or 150 mm pigtail with 4-pin Pico-style QD (Q), or 150 mm pigtail with 4-pin Euro-style QD (Q5), or 4-pin integral Pico-style QD (Q7), or 4-pin integral Euro-style QD (Q8), depending on model. QD cable are ordered separately.
Operating ConditionsTemperature:-10 to +50° C
Relative humidity:90% @ 50° C (non-condensing)
Laser ClassificationLaser products comply with EN60825-1; 2001 and 21 CFR 1040:10, except deviations persuant to Laser Notice 50, dated 7-26-01.

English

Data Sheets

Document Name Part Number File Size Download
1. SMB4050YL Accessory Bracket 140733 377K Download
2. WORLD-BEAM QS18 Adjustable-Field Series 66981 1.1MB Download
3. WORLD-BEAM QS18 Laser Diffuse Series 118899 767K Download
4. WORLD-BEAM QS18 Laser Emitter Series 109415 1MB Download
5. WORLD BEAM QS18 Laser Retroreflective Series 118900 940K Download

Dutch

Installation Guides

Document Name Part Number File Size Download
1. QS18 Laser Emitter Series - Dutch DD104 949K Download

French

Installation Guides

Document Name Part Number File Size Download
1. QS18 Series Laser Emitters - French FD104 955K Download

German

Installation Guides

Document Name Part Number File Size Download
1. QS18 Series Laser Emitters - German GD104 385K Download

Japanese

Data Sheets

Document Name Part Number File Size Download
1. WORLD BEAM QS18 Laser Retroreflective Series - Japanese JP118900 1.9MB Download

Portuguese

Installation Guides

Document Name Part Number File Size Download
1. QS18 Series Laser Emitters - Portuguese PD104 971K Download

Spanish

Installation Guides

Document Name Part Number File Size Download
1. QS18 Series Laser Emitters - Spanish SD104 968K Download

UK English

Installation Guides

Document Name Part Number File Size Download
1. QS18 Series Laser Emitters - UK English ED104 965K Download

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

2011 Product Catalog

The source for all Banner product lines. Features multiple navigation options, applications and product comparisons, and detailed specifications for brackets, cordsets and other accessories.

Get it Now »

Worldwide Distributors

Banner has more than 3,000 distributors worldwide — ready to help you. Enter a U.S. zip code

Find international distributors