WORLD-BEAM QS30 Standard

Online Learning Contact a Banner Engineer About Your Application
Product image

Overview

  • 30 mm threaded barrel or right-angle mounting options
  • 10 to 30V dc supply voltage with bipolar NPN/PNP outputs
  • Available in opposed, polarized and non-polarized retroreflective and diffuse sensing modes
  • Ranges up to 60 m
  • Selectable light- or dark-operate, depending on hookup
  • IP67 and NEMA 6 rating for use in harsh environments
  • Bright LED operating status indicators visible from 360°

Product Specifications

Supply Voltage and Current10 to 30V dc (10% max. ripple) @ 45 mA (exclusive of load)
RangeOpposed:60 m
Non-polarized Retroreflective:12 m, range is specified using one model BRT-84 retroreflector
Polarized Retroreflective:8 m, range is specified using one model BRT-84 retroreflector
Diffuse:1.0 m
Supply Protection CircuitryProtected against reverse polarity, over voltage and transient voltages
Output ConfigurationBipolar:One NPN (current sinking) and one PNP (current sourcing); light operate (LO) or dark operate (DO) selectable or configurable, depending on model
Output Rating100 mA max. each output @ 25° C OFF-state leakage:
NPN:less than 200 µA @ 30V dc
PNP:less than 10 µA
ON-state saturation voltage:
NPN:less than 1.6V @ 100 mA
PNP:less than 2.0V @ 100 mA
Output Protection CircuitryProtected against output short-circuit, continuous overload, transient over-voltages and false pulse on power-up
Output Response TimeOpposed:5 milliseconds ON/OFF
All others:2 milliseconds ON/OFF
Delay at Power-up100 milliseconds; outputs do not conduct during this time.
RepeatabilityOpposed:not applicable
All others:500 microseconds
AdjustmentsOpposed, Polarized Retroreflective and Non-polarized Retroreflective:Selectable light/dark operate is achieved using the gray wire
Light Operate:Low (0 to 3V)*
Dark Operate:High (open or 5 to 30V)*
Diffuse:
Light Operate:High (open or 5 to 30V)*
Dark Operate:Low (0 to 3V)*
Diffuse, Polarized Retroreflective and Non-polarized Retroreflective:Single-turn sensitivity(Gain) adjustment potentiometer
*Note:Input impedance 10 k ohms
IndicatorsLarge, oval LED indicator on back (Except Emitter):
Yellow ON steady:output conducting
2 LED indicators on top:Green and Yellow
Green ON steady:power ON
Green flashing:output overloaded (except receivers)
Yellow ON steady:light sensed
Yellow flashing:marginal excess gain (1.0-1.5x excess gain)
ConstructionPC/ABS housing with acrylic lens cover
Environmental RatingIP67; NEMA 6
Connections5-conductor 2 m or 9 m attached PVC cable, or 4-pin Euro-style quick-disconnect fitting. QD cables are ordered separately.
Operating ConditionsTemperature:-20 to +70° C
Relative humidity:90% @ 50° C (non-condensing)
Vibration and Mechanical ShockAll models meet Mil. Std. 202F requirements. Method 201A (Vibration; frequency 10 to 60 Hz max., double amplitude 0.06-inch acceleration 10G). Also meets IEC 947-5-2 requirements: 30G, 11 milliseconds duration, half-sine wave.

English

Data Sheets

Document Name Part Number File Size Download
1. Accessory Mounting Brackets 143737 596K Download
2. WORLD-BEAM QS30 Series, ac/dc models 119166 836K Download
3. WORLD-BEAM QS30 Standard Series, dc models 119165 847K Download

Installation Guides

Document Name Part Number File Size Download
1. WORLD-BEAM QS30 Series, ac/dc models 119168 310K Download
2. WORLD-BEAM QS30 Standard Series, dc models 119167 302K Download

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

Looking for CAD Files?

Browse by model family or type in your model number to find STEP, IGS, DXF, or PDF files for your project.

Find them now »

Worldwide Distributors

Banner has more than 3,000 distributors worldwide — ready to help you. Enter a U.S. zip code

Find international distributors