D10 Expert with Numeric Display—Dual Discrete

Online Learning Contact a Banner Engineer About Your Application
Product image

Uses & Applications

Previous Next 1 | 2 | 3 | 4 | 5

CD Stack Size Detection

Color Sorting

Stack Height and Adhesive Bead Detection

Web Break Detection Using Fiber Optics

Thread Break Detection

Overview

High-performance, low-contrast plastic fiber optic sensor with numeric display

  • 12 to 24V dc supply voltage with two NPN or PNP outputs, depending on model
  • Digital display of signal strength and operating status
  • Push-button for easy-to-set static, dynamic or single-point programming
  • Manual adjustment for fine tuning
  • Light- or dark-operate selectable
  • Four-mode power and speed selection with automatic crosstalk avoidance circuitry
  • Response time as fast as 50 microseconds
  • Visible red or green sensing beam

Product Specifications

Supply Voltage and Current12 to 24V dc (10% max. ripple) @ less than 65 mA (exclusive of load)
RangeVaries by sensing mode and fiber optics used
Supply Protection CircuitryProtected against reverse polarity and transient voltage
Output ConfigurationTwo independently configured NPN (current sinking) or PNP (current sourcing) solid state transistors
Output Rating150 mA max. load OFF-state leakage current:less than 10 µA @ 24V dc
ON-state saturation voltage:
NPN:less than 1.5V @ 150 mA load
PNP:less than 2.5V @ 150 mA load
Output Protection CircuitryProtected against false pulse on power-up and continuous short-circuit
Output Response TimeProgrammable, 50 microseconds, 200 microseconds, 1 millisecond, 2.5 milliseconds
Delay at Power-up1 second; outputs do not conduct during this time.
AdjustmentsTwo push buttons or remote programming of (TEACH) switching threshold response time, OFF-delay, light operate (LO)/dark operate (DO) and display
IndicatorsFour-digit digital display plus LED indicators for active channel, push-button lockout, OFF-delay and light operate (LO)/dark operate (DO) selection; two yellow LEDs serve as output indicators and active channel indicator.
ConstructionBlack ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover.
Environmental RatingNEMA 1; IEC IP50
ConnectionsPVC-jacketed 2 m or 9 m 6-wire attached cable or integral 6-pin Pico-style QD. QD cables are ordered separately.
Operating ConditionsTemperature:-20° to +55° C
Storage Temperature:-20° to +80° C
Relative humidity:90% @ 50° C
Ambient Temperature Rating:
3 stacked devices:55° C @ 150 mA load
7 stacked devices:50° C @ 50 mA load
10 stacked devices:45° C @ 50 mA load
Installation35 mm DIN rail or included mounting bracket

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

"No more costly wiring runs"

“I’m delighted with Banner’s SureCross wireless system. It gives us comprehensive monitoring and control in previously inaccessible locations. And it’s easy to expand and relocate as needed.”

Worldwide Distributors

Banner has more than 2,000 distributors worldwide — ready to help you.

Find international distributors