D10 Expert with Bargraph Display & Bussable Power
Overview
Bussable Power models with improved temperature compensation available for side-by-side mounting and simplified wiring of up to 16 sensors
- 12 to 24V dc or 15 to 24V dc supply voltage with either an NPN or PNP discrete output, and a 4-20 mA current analog output or 0-10V dc voltage analog output, depending on model
- Digital display of signal strength and operating status
- Push-button for easy-to-set static, dynamic or single-point programming
- Manual adjustment for fine tuning
- Light- or dark-operate selectable
- Four-mode power and speed selection with automatic crosstalk avoidance circuitry
- Response time as fast as 50 microseconds
- Visible red sensing beam
Product Specifications
| Sensing Beam | 660 nm visible red |
|---|---|
| Supply Voltage | 12 to 30V dc (10% max. ripple) @ less than 45 mA exclusive of load |
| Supply Protection Circuitry | Protected against reverse polarity and transient voltage |
| Delay at Power Up | 850 milliseconds max.; outputs do not conduct during this time |
| Output Configuration | Main Units:Bipolar; 1 current sourcing (PNP) and 1 Sub-units:1 current sourcing (PNP) or 1 current sinking |
| Output Rating | 100 mA max. load (derate 1 mA per °C above 30° C)
OFF-state leakage current:< 5 μA at 30V dc ON-state saturation voltage: NPN:< 1.5V
PNP:< 2V
Supply 15V or more:up to 16 units with 100 mA outputsLess than 15V supply (9 m cable):up to 4 units with 100 mA outputs, up to 8 units with 50 mA outputs |
| Output Protection | Protected against false pulse on power-up and continuous short-circuit |
| Output Response Time | 500 microseconds (normal mode) or 200 microseconds (high-speed mode) |
| Repeatability | 100 microseconds (normal mode) or 66 microseconds (high-speed mode) |
| Adjustments | Two push buttons and remote wire
Push buttons or remote wire:Expert TEACH programming (two-point static, dynamic and single-point static), light operate (LO)/dark operate (DO), OFF-delay and response speed Push button only:Manually adjust (+/-) sensitivity Remote wire only:Push-button lockout |
| Indicators | 8-segment Red bargraph:Light-to-dark signal difference relative to taught condition (single-point TEACH ) Green status indicators:LO, DO, High Speed and OFF-delay Green LED:Power ON Yellow LED:Output conducting |
| Construction | Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover. |
| Environmental Rating | NEMA 1; IEC IP50 |
| Connections | Main units:PVC-jacketed 2 m or 9 m (6.5' or 30') Sub-units:PVC-jacketed 2 m or 9 m (6.5' or 30') |
| Operating Conditions | Temperature:-10° to +55° C Storage Temperature:-20° to +85° C Relative humidity:90% @ 50° C |
Banner Insider eNewsletter
Helpful application information, new product updates, answers to frequently asked questions, and more.
Subscribe Now »Food & Beverage
Is your line competitive? Innovative, high-quality solutions for every phase of production. Enjoy increased accuracy, greater productivity, cost savings.
Learn more »Worldwide Distributors
Banner has more than 2,000 distributors worldwide — ready to help you.
Find international distributors