D10 Expert with Bargraph Display—Discrete
Overview
High-performance, low-contrast plastic fiber optic sensor with bargraph display
- 10 to 30V dc supply voltage with bipolar NPN or PNP outputs
- Bargraph display of TEACH and signal strength
- Push button for easy-to-set static, dynamic or single-point programming
- Manual adjustment for fine tuning
- Light- or dark-operate selectable
- 500 microsecond response with crosstalk avoidance or high-speed mode of 200 microsecond response with crosstalk avoidance disabled
- Visible red or green sensing beam
Product Specifications
| Supply Voltage and Current | 10 to 30V dc (10% max. ripple) @ less than 45 mA (exclusive of load) |
|---|---|
| Range | Varies by sensing mode and fiber optics used |
| Supply Protection Circuitry | Protected against reverse polarity and transient voltage |
| Output Configuration | Bipolar:One NPN (current sinking) and one PNP (current sourcing) |
| Output Rating | 150 mA max. load
OFF-state leakage current:less than 5 µA @ 30V dc ON-state saturation voltage: NPN:less than 200 mV @ 10 mA; 1V @ 150 mA load
PNP:less than 1V @ 10 mA; 1.5V @ 150 mA load
|
| Output Protection Circuitry | Protected against false pulse on power-up and continuous short-circuit |
| Output Response Time | 500 microseconds (normal mode) or 200 microseconds (high-speed mode) |
| Delay at Power-up | 200 millisecond; outputs do not conduct during this time. |
| Repeatability | 100 microseconds (normal mode) or 66 microseconds (high-speed mode) |
| Adjustments | Two push buttons and remote wire
Push buttons or remote wire:Expert TEACH programming (two-point static, dynamic and single-point static), light operate (LO)/dark operate (DO), OFF-delay and response speed Push button only:Manually adjust (+/-) sensitivity Remote wire only:Push-button lockout |
| Indicators | 8-segment Red bargraph:Light-to-dark signal difference relative to taught condition (single-point TEACH ) Green status indicators:LO, DO, High Speed and OFF-delay Green LED:Power ON Yellow LED:Output conducting |
| Construction | Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover. |
| Environmental Rating | NEMA 1; IEC IP50 |
| Connections | PVC-jacketed 2 m or 9 m 6-wire attached cable or integral 6-pin Pico-style QD. QD cables are ordered separately. |
| Operating Conditions | Temperature:-10° to +55° C Storage Temperature:-20° to +85° C Relative humidity:90% @ 50° C |
| Installation | 35 mm DIN rail or included mounting bracket |
Banner Insider eNewsletter
Helpful application information, new product updates, answers to frequently asked questions, and more.
Subscribe Now »"No more costly wiring runs"
“I’m delighted with Banner’s SureCross wireless system. It gives us comprehensive monitoring and control in previously inaccessible locations. And it’s easy to expand and relocate as needed.”
Worldwide Distributors
Banner has more than 2,000 distributors worldwide — ready to help you.
Find international distributors