ES-TN-14H5 & ES-TN-14H6 Safety Modules

Online Learning Contact a Banner Engineer About Your Application
Product image

Overview

  • Monitors external safety devices for contact failure or wiring fault
  • Offers 24V dc supply voltage
  • Includes four normally open (NO) immediate and four normally open (NO) delayed safety outputs
  • Provides 4 amp rating of safety outputs
  • Includes one normally closed (NC) immediate and one normally closed (NC) delayed non-safety auxiliary outputs
  • Offers choice of models with a delay of 0-20 or 0-200 seconds
  • Features removable terminal blocks
  • Resets automatically or manually
  • Responds in 50 milliseconds
  • Meets US and international standards
  • Rated IEC IP40; NEMA 1

Product Specifications

Supply Voltage and Current24V dc, ±20% Power Consumption:approx. 5 W
Supply Protection CircuitryProtected against transient voltages and reverse polarity
Output ConfigurationOutput (K1 & K2):four redundant (total of eight) safety relay (forced-guided) contacts—AgNi, gold flashed, plus one normally-closed auxiliary monitor output—AgNi, gold flashed
Output (K3 & K4):four redundant (total of eight) delayed (forced-guided) contacts—AgNi, gold flashed, plus one normally-closed auxiliary monitor output—AgNi, gold flashed
Contact rating (all normally-open and normally-closed output contacts):
Max. voltage:250V ac/dc
Max. current:4 A ac/dc
Min. current:30 mA @ 24V dc
Max. power:100 W (1000 VA)
Mechanical life:50,000,000 operations
Electrical life:100,000 at full resistive load
Note:Transient suppression is recommended when switching inductive loads. Install suppressors across load. Never install suppressors across output contacts.
Output Response TimeK1 & K2:50 milliseconds typical
K3 & K4 (ES-TN-14H5):0, 0.5, 1, 2, 4, 6, 8, 10, 15, 20 seconds
K3 & K4 (ES-TN-15H5):0, 5, 10, 20, 30, 50, 70, 100, 150, 200 seconds
Delay output timing tolerance:set time ±100 milliseconds or ±2%, whichever is greater
Input RequirementsInput switch must have a normally-closed contact capable of switching 20 mA @ 24V dc.



Reset switch must have one normally-open contact capable of switching 20 mA @ 24V dc.



Note: Inputs must be voltage-free, dry contacts.
ON-Time Delay100 milliseconds max.; time from the E-stop contacts to close (Auto Reset) or the reset button to open (Manual Reset) and the safety outputs to close.
Status Indicators6 Green LED indicators:Power, Monitor, E-Stop, Out (K1 & K2 ON/OFF), Reset, Timed-Out (K3 & K4 ON/OFF)
1 Red LED indicator:Fault
ConstructionPolycarbonate housing
Environmental RatingRated IEC IP40; NEMA 1, Terminals IP20, max. terminal torque 0.8 Nm
MountingMounts to standard 35 mm DIN-rail track. Safety module must be installed inside an enclosure rated NEMA 3 (IEC IP54), or better.
Vibration Resistance10 to 55 Hz @ 0.35 mm displacement per IEC 68-2-6
Operating ConditionsTemperature:0° to +50° C
Relative humidity:90% @ +50° C (non-condensing)

English

Data Sheets

Document Name Part Number File Size Download
1. ES-FA-6G Safety Module
(3 N.O. safety outputs, 24V ac/dc, 1 input)		 55581 138K Download
2. ES-FA-9AA and ES-FA-11AA Safety Modules 60606 407K Download
3. ES-FL-2A Safety Module
(3 N.O. safety outputs, 24V ac/dc)		 46262 87K Download
4. ES-GA/HA-5A Safety Modules
(4 N.O. safety outputs, 24V dc		 51883 534K Download
5. ES-TA-3D1 Safety Module
(2 N.O. safety outputs, 24V dc, 6 inputs, DeviceNet)		 51246 456K Download
6. ES-TA-3F1 Safety Module
(2 N.O. safety outputs, 24V dc, 10 inputs, DeviceNet)		 53423 651K Download
7. ES-TN-14H5/6 Safety Modules
(8 N.O. safety outputs, 24V dc, adjustable delay)		 68436 357K Download
8. ES-TN-1H5/6 Safety Modules
(4 N.O. safety ouptus, 24V dc, adjustable delay)		 B_3102211 637K Download
9. ES-TN-1H5/6 Safety Modules
(4 N.O. safety ouptus, 24V dc, adjustable delay)		 58697 366K Download
10. ES-TN-1Hx Safety Modules
(4 N.O. safety outputs, fixed delay)		 61061 477K Download
11. ES-UA/VA-5A Safety Modules
(4 N.O. safety outputs, 12-24V dc/115 or 230V ac)		 122365 1.6MB Download
12. GM-FA-10J Gate Monitoring Module
(24V ac/dc, 1 or 2 inputs)		 60998 1.4MB Download
13. SI-MAG1C Magnetic Style Gate Monitoring Module
(24V ac/dc, 1 input)		 49376 173K Download

Japanese

Data Sheets

Document Name Part Number File Size Download
1. ES-FA-6G Safety Module
(3 N.O. safety outputs, 24Vac/dc, 1 input) - Japanese		 J30002M 298K Download
2. ES-FA-9AA Safety Module
(3 N.O safety outputs,24Vac/dc,1 or 2 inputs) - Japanese		 J30014M 475K Download
3. ES-GA-5A/ES-HA-5A Safety Modules - Japanese J30001M 285K Download
4. ES-TN-14H5/6 Safety Modules
(8 N.O safety outputs, 24Vdc, adj delay) - Japanese		 J30017M 590K Download
5. ES-TN-1H5/6 Safety Modules
(4 N.O. safety ouptus, 24V dc, adj delay) - Japanese		 J30015M 728K Download
6. ES-TN-1Hx Safety Modules
(4 N.O. safety outputs, fixed delay) - Japanese		 J30016M 683K Download
7. ES-UA-5A/ES-VA-5A Safey Modules - Japanese J30012M 613K Download

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

Looking for CAD Files?

Browse by model family or type in your model number to find STEP, IGS, DXF, or PDF files for your project.

Find them now »

Worldwide Distributors

Banner has more than 3,000 distributors worldwide — ready to help you. Enter a U.S. zip code

Find international distributors