E-Stop & Guard Monitoring Modules

Overview

• Modules monitor up to 10 external devices for contact failure or wiring faults.
• Module goes into lockout mode if it detects a fault.
• Available voltages include 24V dc; 24V ac/dc; 115V ac or 12 to 24V dc; or 230V ac or 12 to 24V ac/dc.
• Modules monitor positive-opening E-stop and interlock switches.
• Models are available with 2 to 4 normally open safety outputs, depending on module.
• Safety outputs are rated 4 or 6 amps, depending on module.
• Non-safety auxiliary outputs are available on most modules.
• Modules are available with an adjustable output delay of 0-20 or 0-200 seconds, depending on module.
• Two modules allow central monitoring and control over a DeviceNet control network.
• Ratings are NEMA 1 and at least IEC IP20.
• Housings are rugged polycarbonate.
• Bright red and green LED indicators show module's operating status.