SureCross DX80 Gateways

Online Learning Contact a Banner Engineer About Your Application
Product image

Overview

  • Each Gateway hosts one or more Nodes in the same frequency band.
    • The Gateway can act as a master device in a star topology, controlling input-to-output mapping.
    • The Gateway acts as a a Modbus slave in a host control system using RS-485 Modbus RTU.
    • To relay mapped I/O longer distances, a Gateway can be positioned between two Nodes to increase range.
  • 900 MHz or 2.4 GHz frequency models are available to accommodate worldwide communication standards.
  • Models are available with analog and discrete, or discrete I/O.
  • Menu and configuration access push buttons provide click-through menu-driven configuration of basic network settings.
  • Rotary switches for network identity and device address are easy to set and change.
  • Gateways require 10 to 30V dc line power.
  • Models with internal or external antennas are available, depending on range.
  • Wiring terminals are accessible without removal from mounting.
  • Base is designed for four-point flat mounting or DIN-rail mounting.
  • Housing is rated IEC IP67; NEMA 6 for long-lasting performance in rugged environments.

Product Specifications

GeneralPower:+10 to 30V dc
Power consumption:less than 1.4 W @ 24V dc
Indicators:Two LED, bicolor
Switches:Two push buttons
Display:Six character LED
Mounting:#10 or M5 (M5 hardware included)
M5 fasteners—max. tightening torque:0.56 N/m (5 in/lbf)
Case material:polycarbonate
Weight:0.26 kg
External cable gland:four PG-7 type, One 1/2—NPT type
Cable glands, max. tightening torque:0.56 N/m (5 in/lbf)
RadioRange with standard 2 dB antenna*:
900 MHz models:up to 4.8 km (3 miles)
2.4 GHz models:up to 3.2 km (2 miles)
Frequency:
900 MHz models::902 -928 MHz ISM band
2.4 MHz models:2.4 - 2.4835 GHz ISM band
Transmit power:
900 MHz models:21 dBm conducted
2.4 GHz models:18 dBm conducted, 20 dBm EIRP max.
Spread spectrum technology:Frequency Hopping Spread Spectrum (FHSS)
Antenna connector:ext. reverse polarity SMA - 50 ohms
Antenna—max. tightening torque:0.45 N/m (4 in/lbf)
Link timeout:configurable, up to 2 minutes
*Note:The range depends upon the environment and line of site. High-gain antennas are available to increase the range.
CommunicationsInterface:2-wire, RS-485
Baud rates:9.6k, 19.2k (default) or 38.4k
Data format:8 data bits, no parity, 1 stop bit
Protocol:Modbus RTU
InputsDiscrete models:
Inputs:four sourcing
Rating:3 mA max. current @ 30V dc
Sample rate:125 milliseconds
Report rate:On Change of State
ON condition:greater than 8V
OFF condition:less than 5V
Analog and discrete models:
Discrete inputs:two sourcing
Discrete rating:3 mA max. current @ 30V dc
Discrete sample rate:125 milliseconds
Discrete report rate:On change of state
Discrete ON condition:greater than 8V
Discrete OFF condition:less than 5V
Analog inputs:0-20 mA
Analog sample rate:125 milliseconds
Report rate:1 second or on Change of State (1% change in value)
OutputsDiscrete models:
Outputs:four sourcing
Rating:100 mA max. current @ 30V dc
Update rate:125 milliseconds
ON condition:supply minus 2V
OFF condition:less than 2V
State following timeout:de-energized (OFF)
Discrete and analog models:
Discrete outputs:two sourcing
Discrete rating:100 mA max. current @ 30V dc
Discrete ON condition:supply minus 2V
Discrete OFF condition:less than 2V
Discrete update rate:125 milliseconds
Analog outputs:0-20 mA
Analog update rate:125 milliseconds
State following timeout:de-energized (OFF)
EnvironmentalEnvironmental rating*:IEC IP67; NEMA 6
Operating temperature**:-40 to +85° C (electronics); -20 to +80° C (LCD)
Relative humidity:95% (non-condensing)
Shock and vibration:IEC IEC 68-2-6 and IEC 68-2-7
Shock:30 g, 11 millisecond half-sine wave, 18 shocks
Vibration:0.5 mm p-p, 10-60 Hz
*Note 1:Please refer to the SureCross DX80 Quick Start Guide, Banner part number 128185, for installation and waterproofing instructions.
*Note 2:Operating the devices at the maximum operating conditions for extended periods can shorten the life of the device.
Compliance900 MHz models:FCC ID TGUDX80 - This device complies with FCC Part 15, Subpart C, 15.247
2.4 GHz models:FCC ID UE300DX80-2400 - This device complies with FCC Part 15, Subpart C, 15.247. ETSI/EN: In accordance with EN 300 328: V1.7.1 (2006-05)
Product Specifications and Modifications DisclaimerAll specifications published in this document are subject to change. Banner reserves the right to modify the specifications of products, prior to their order, without notice.

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

Food & Beverage

Is your line competitive? Innovative, high-quality solutions for every phase of production. Enjoy increased accuracy, greater productivity, cost savings.

Learn more »

Worldwide Distributors

Banner has more than 3,000 distributors worldwide — ready to help you. Enter a U.S. zip code

Find international distributors