SureCross DX80 FlexPower Nodes

Online Learning Contact a Banner Engineer About Your Application
Product image

Overview

  • One or more Nodes in the same frequency band can be used with one Gateway.
  • FlexPower Nodes work off of 10 to 30V dc line-power or low-power consumption options (3.6 to 5.5V dc) from solar or battery modules.
  • Configurable switched power outputs provide power for sensors (up to 24V dc) from FlexPower Supply Modules.
  • Each Node is equipped with up to twelve distinct I/O for gathering data to be concentrated at the Gateway.
  • Models are available with the following I/O configurations:
    • Analog and discrete
    • Temperature and discrete (thermocouple and thermistor)
    • Temperature (RTD)
    • M-GAGE
  • Nodes feature Cyclical Redundancy Checking (CRC) to ensure the accuracy of data transmission.
  • 900 MHz or 2.4 GHz frequency models are available to accommodate worldwide communication standards.
  • Menu and configuration access push buttons provide click-through menu-driven configuration of basic network settings.
  • Rotary switches for network identity and device address are easy to set and change.
  • Models with internal or external antennas are available, depending on range.
  • Wiring terminals are accessible without removal from mounting.
  • Base is designed for four-point flat mounting or DIN-rail mounting.
  • Housing is rated IEC IP67; NEMA 6 for long-lasting performance in rugged environments.

Product Specifications

GeneralPower:+10 to 30V dc or 3.6 to 5.5V dc low power option
Power consumption:less than 1.4 W @ 24V dc
Indicators:Two LED, bicolor
Switches:Two push buttons
Display:Six character LED
Mounting:#10 or M5 (M5 hardware included)
M5 fasteners—max. tightening torque:0.56 N/m (5 in/lbf)
Case material:polycarbonate
Weight:0.26 kg
External cable gland:four PG-7 type, One 1/2—NPT type
Cable glands, max. tightening torque:0.56 N/m (5 in/lbf)
RadioRange with standard 2 dB antenna*:
900 MHz models:up to 4.8 km (3 miles)
2.4 GHz models:up to 3.2 km (2 miles)
Frequency:
900 MHz models::902 -928 MHz ISM band
2.4 MHz models:2.4 - 2.4835 GHz ISM band
Transmit power:
900 MHz models:21 dBm conducted
2.4 GHz models:18 dBm conducted, 20 dBm EIRP max.
Spread spectrum technology:Frequency Hopping Spread Spectrum (FHSS)
Antenna connector:ext. reverse polarity SMA - 50 ohms
Antenna—max. tightening torque:0.45 N/m (4 in/lbf)
Link timeout:defined by Gateway
*Note:The range depends upon the environment and line of site. High-gain antennas are available to increase the range.
InputsAnalog and discrete models:
Discrete inputs:two sinking
Discrete rating:3 mA max. current @ 30V dc
Discrete 1, 2 sample rate:125 milliseconds
Discrete 1, 2 report rate:On change of state
Discrete ON condition:less than 0.7V
Discrete OFF condition:greater than 2V or Open
Analog inputs:0-20 mA
Switched power for analog input 1:defaults SP1: 15V @ 150 mA for 500 milliseconds every 15 minutes
Analog 1 sample rate:15 minutes
Analog 1 report rate:15 minutes
Analog 2 sample rate:1 second
Analog 2 report rate:15 seconds or On Change of State (1% change in value)
Thermocouple models:
Discrete inputs:two sinking
Discrete rating:3 mA max. current @ 30V dc
Discrete 1, 2 sample rates:1 second
Discrete 1, 2 report rates:On change of State
Discrete ON condition:less than 0.7V
Discrete OFF condition:greater than 2V or Open
OutputsAnalog/discrete and thermocouple models:
Discrete outputs:two NMOS sinking
Discrete rating:less than 10 mA max. current @ 30V dc
Discrete update rate:up to 1 per second
Discrete ON condition:less than 0.7V
Discrete OFF condition:open
State following timeout:de-energized (OFF)
ThermocoupleThermocouple models only:
Thermocouple inputs:three
Thermocouple input sample rate:1 second
Thermocouple input report rate:periodic, 16 seconds
Thermistor inputs:one, model number BWA-THERMISTOR-001
Resolution:0.1° C, 24-bit A/D converter
Thermocouple accuracy:0.1%of full scale reading +0.8° C
Thermistor accuracy:0.4° C (10 to 50° C); up to 0.8° C (-40 to +85° C)
EnvironmentalEnvironmental rating*:IEC IP67; NEMA 6
Operating temperature**:-40 to +85° C (electronics); -20 to +80° C (LCD)
Relative humidity:95% (non-condensing)
Shock and vibration:IEC IEC 68-2-6 and IEC 68-2-7
Shock:30 g, 11 millisecond half-sine wave, 18 shocks
Vibration:0.5 mm p-p, 10-60 Hz
*Note 1:Please refer to the SureCross DX80 Quick Start Guide, Banner part number 128185, for installation and waterproofing instructions.
*Note 2:Operating the devices at the maximum operating conditions for extended periods can shorten the life of the device.
Compliance900 MHz models:FCC ID TGUDX80 - This device complies with FCC Part 15, Subpart C, 15.247
2.4 GHz models:FCC ID UE300DX80-2400 - This device complies with FCC Part 15, Subpart C, 15.247. ETSI/EN: In accordance with EN 300 328: V1.7.1 (2006-05)
Product Specifications and Modifications DisclaimerAll specifications published in this document are subject to change. Banner reserves the right to modify the specifications of products, prior to their order, without notice.

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

Built-to-Order Tower Lights

  • Preassembled, custom-configured
  • Optional audible function
  • 5 colors, standard or high-brightness LEDs.
Configure your Tower Light »

Worldwide Distributors

Banner has more than 3,000 distributors worldwide — ready to help you. Enter a U.S. zip code

Find international distributors