| Supply Voltage and Current | 10 to 30V dc (10% max. ripple) @ less than 25 mA (exclusive of load)
|
| Range | Opposed:4 m
Non-polarized Retroreflective:2 m, range is specified using one model BRT-50 retroreflector
Polarized Retroreflective:1 m, range is specified using one model BRT-50 retroreflector
Diffuse:180 mm
Divergent Diffuse:50 mm
Convergent:10 or 20 mm, depending on model
|
| Supply Protection Circuitry | Protected against reverse polarity and transient voltages
|
| Ouput Configuration | Solid-state complementary (SPDT):NPN (current sinking) or PNP (current sourcing), depending on model
|
| Output Rating | 150 mA max. each output @ 25° C
OFF-state leakage current:less than 10 µA @ 30V dc
ON-state saturation voltage:less than 1V @ 10 mA; less than 2.0V @ 150 mA
|
| Output Protection Circuitry | Protected against false pulse on power-up and continuous overload or short circuit of outputs
|
| Output Response Time | Opposed:8 milliseconds ON; 4 milliseconds OFF
All others:1.5 milliseconds
|
| Delay at Power-up | 500 milliseconds; outputs do not conduct during this time.
|
| Repeatability | Opposed:1 millisecond
All others:175 microseconds
|
| Adjustments | One rubber-sealed push button
Hold:Max. gain
Click:Reduce gain one increment
|
| Indicators | 2 LED Indicators:Green and Yellow
Green ON steady:power ON
Green flashing:light sensed
Green flashing rapidly 5 times:max. gain
Green single flash:click registered, gain reduced by one increment
Yellow/Green alternating:min. gain (can not reduce further)
|
| Construction | Black polycarbonate/ABS alloy housing; totally encapsulated circuitry
|
| Environmental Rating | IEC IP67; NEMA 6
|
| Connections | 2 m or 9 m attached PVC cable, or 150 mm pigtail with threaded 4-pin Pico-style quick-disconnect fitting. QD cables are ordered separately.
|
| Operating Conditions | Temperature:-20° to +55° C
Relative humidity:90% @ 50° C (non-condensing)
|