| Supply Voltage and Current | 10 to 30V dc (10% max. ripple)
Emitter:15 mA (exclusive of load)
Receiver:15 mA (exclusive of load)
|
| Range | 1.8 m
|
| Supply Protection Circuitry | Protected against reverse polarity
|
| Output Configuration | SPST solid-state switch:NPN (current sinking) or PNP (current sourcing), depending on model. Light operate (LO) or dark operate (DO), depending on model
|
| Output Rating | 150 mA max.
OFF-state leakage current:less than 10 µA @ 30V dc
ON-state saturation voltage:less than 0.5V @ 10 mA dc; less than 1.0V @ 150 mA dc
|
| Output Protection Circuitry | Protected against false pulse on power-up and continuous overload or short circuit of outputs; Overload trip point 200 mA min. @ 20° C
|
| Output Response Time | 8 millisecond ON; 4 milliseconds OFF
|
| Repeatability | 1.0 millisecond
|
| Indicators | 2 LED Indicators:Green and Yellow
Green ON steady:power to sensor is ON
Green flashing:output overload
Yellow ON steady:light is sensed
Yellow flashing:marginal excess gain (1-1.5x) in light condition
|
| Construction | Black ABS housing (UL 94-VO) with hermetically sealed glass lens
|
| Environmental Rating | IP54; NEMA 4
|
| Connections | 2 m or 9 m attached PVC cable, or 150 mm pigtail with 3-pin Pico-style quick-disconnect fitting. QD cables are ordered separately.
|
| Operating Conditions | Temperature:-20° to +55° C
Relative humidity:90% @ 50° C (non-condensing)
|
| Application Notes | M3 stainless-steel mounting hardware is included with each sensor. Optional mounting brackets are available.
|