WORLD-BEAM QS30 Standard

Online Learning Contact a Banner Engineer About Your Application
Product image

Overview

  • 30 mm threaded barrel or right-angle mounting options
  • 10 to 30V dc supply voltage with bipolar NPN/PNP outputs
  • Available in opposed, polarized and non-polarized retroreflective and diffuse sensing modes
  • Ranges up to 60 m
  • Selectable light- or dark-operate, depending on hookup
  • IP67 and NEMA 6 rating for use in harsh environments
  • Bright LED operating status indicators visible from 360°

Product Specifications

Supply Voltage and Current10 to 30V dc (10% max. ripple) @ 45 mA (exclusive of load)
RangeOpposed:60 m
Non-polarized Retroreflective:12 m, range is specified using one model BRT-84 retroreflector
Polarized Retroreflective:8 m, range is specified using one model BRT-84 retroreflector
Diffuse:1.0 m
Supply Protection CircuitryProtected against reverse polarity, over voltage and transient voltages
Output ConfigurationBipolar:One NPN (current sinking) and one PNP (current sourcing); light operate (LO) or dark operate (DO) selectable or configurable, depending on model
Output Rating100 mA max. each output @ 25° C OFF-state leakage:
NPN:less than 200 µA @ 30V dc
PNP:less than 10 µA
ON-state saturation voltage:
NPN:less than 1.6V @ 100 mA
PNP:less than 2.0V @ 100 mA
Output Protection CircuitryProtected against output short-circuit, continuous overload, transient over-voltages and false pulse on power-up
Output Response TimeOpposed:5 milliseconds ON/OFF
All others:2 milliseconds ON/OFF
Delay at Power-up100 milliseconds; outputs do not conduct during this time.
RepeatabilityOpposed:not applicable
All others:500 microseconds
AdjustmentsOpposed, Polarized Retroreflective and Non-polarized Retroreflective:Selectable light/dark operate is achieved using the gray wire
Light Operate:Low (0 to 3V)*
Dark Operate:High (open or 5 to 30V)*
Diffuse:
Light Operate:High (open or 5 to 30V)*
Dark Operate:Low (0 to 3V)*
Diffuse, Polarized Retroreflective and Non-polarized Retroreflective:Single-turn sensitivity(Gain) adjustment potentiometer
*Note:Input impedance 10 k ohms
IndicatorsLarge, oval LED indicator on back (Except Emitter):
Yellow ON steady:output conducting
2 LED indicators on top:Green and Yellow
Green ON steady:power ON
Green flashing:output overloaded (except receivers)
Yellow ON steady:light sensed
Yellow flashing:marginal excess gain (1.0-1.5x excess gain)
ConstructionPC/ABS housing with acrylic lens cover
Environmental RatingIP67; NEMA 6
Connections5-conductor 2 m or 9 m attached PVC cable, or 4-pin Euro-style quick-disconnect fitting. QD cables are ordered separately.
Operating ConditionsTemperature:-20 to +70° C
Relative humidity:90% @ 50° C (non-condensing)
Vibration and Mechanical ShockAll models meet Mil. Std. 202F requirements. Method 201A (Vibration; frequency 10 to 60 Hz max., double amplitude 0.06-inch acceleration 10G). Also meets IEC 947-5-2 requirements: 30G, 11 milliseconds duration, half-sine wave.

English

Data Sheets

Document Name Part Number File Size Download
1. Accessory Mounting Brackets 143737 596K Download
2. WORLD-BEAM QS30 Series, ac/dc models 119166 836K Download
3. WORLD-BEAM QS30 Standard Series, dc models 119165 847K Download

Installation Guides

Document Name Part Number File Size Download
1. WORLD-BEAM QS30 Series, ac/dc models 119168 310K Download
2. WORLD-BEAM QS30 Standard Series, dc models 119167 302K Download

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

"No more costly wiring runs"

“I’m delighted with Banner’s SureCross wireless system. It gives us comprehensive monitoring and control in previously inaccessible locations. And it’s easy to expand and relocate as needed.”

Worldwide Distributors

Banner has more than 3,000 distributors worldwide — ready to help you. Enter a U.S. zip code

Find international distributors