Q45 Universal Voltage Series

Online Learning Contact a Banner Engineer About Your Application
Product image

Overview

  • Universal supply voltage: 24 to 250V ac, 50/60 Hz; 12 to 250V dc
  • SPDT electromechanical relay or optically isolated SPST solid-state switch output, depending on model
  • Available in opposed, polarized and non-polarized retroreflective, convergent, diffuse, and glass or plastic fiber optic sensing modes
  • Accommodates output timing logic or 7-segment LED signal strength display
  • Ranges up to 60 m
  • 30 mm threaded mounting base

Product Specifications

Supply Voltage and Current24 to 250V ac, 50/60 Hz or 12 to 250V dc (1.5 watts max.)
RangeOpposed:60 m
Diffuse (long range):1.8 m
Diffuse (short range):450 mm
Diffuse (high power):3 m
Non-polarized Retroreflective:0.08 to 9 m, range is specified using one model BRT-3 retroreflector
Polarized Retroreflective:0.15 to 6 m, range is specified using one model BRT-3 retroreflector
Convergent:38 or 100 mm, depending on model
Plastic and Glass Fiber Optic:Range varies by sensing mode and fiber optics used
Supply Protection CircuitryProtected against transient voltages. DC hookup is without regard to polarity.
Output ConfigurationQ45VR3 models (except emitters):SPDT (single-pole double-throw) electromechanical relay output
Q45BW13 models (except emitters):Optically isolated SPST solid-state switch
Output RatingQ45VR3 models:
Max. switching power (resistive load):1250VA, 150W
Max. switching voltage (resistive load):250V ac, 125V dc
Max. switching current (resistive load):5A @ 250V ac, 5A @ 30V dc derated to 200 mA @ 125V dc
Min. voltage and current:5V dc, 10 mA
Mechanical life of relay:50,000,000 operations
Electrical life of relay at full resistive load:100,000 operations
Q45BW13 models:250V ac, 250V dc, 300 mA
Output saturation voltage:3V @ 300 mA, 2V @ 15 mA
OFF-state leakage current: less than 50 µA
Inrush current:1A for 20 milliseconds, non-repetitive
Output Protection CircuitryProtected against false pulse on power-up
Output Response TimeResponse time is independent of signal strength. Q45VR3 models:15 milliseconds ON/OFF
Q45BW13 models:
Opposed:2 milliseconds ON; 1 milliseconds OFF
All others:2 milliseconds ON/OFF
Delay at Power-upQ45VR3 models:100 milliseconds; relay is de-energized during this time.
Q45BW13 models:100 milliseconds; outputs do not conduct during this time.
RepeatabilityRepeatability is independent of signal strength. Opposed:0.25 milliseconds
All others:0.5 milliseconds
AdjustmentsLight-operate/dark-operate select switch and multi-turn sensitivity control on top of sensor, beneath a transparent polycarbonate o-ring sealed cover, allows precise sensitivity setting (turn clockwise to increase gain). Optional logic and logic/display modules have adjustable timing functions.
IndicatorsIndicator LEDs are highly visible, located beneath a raised transparent polycarbonate dome on top of the sensor. Power (Green):LED lights whenever 24 to 250V ac, or 12 to 250V dc power is applied
Signal (Red):LED lights whenever the sensor sees its modulated light source and pulses at a rate proportional to the strength of the received light signal
Load (Yellow):LED lights whenever an output relay is energized
Optional 7-segment display:LED display lights for signal strength
ConstructionMolded reinforced thermoplastic polyester housing, o-ring sealed transparent polycarbonate cover, molded acrylic lenses and stainless-steel hardware. Q45s are designed to meet 1200 psi washdown. The base of cabled models has a 1/2 inch NPS integral internal conduit thread.
Environmental RatingNEMA 6P; IEC IP67
ConnectionsQ45VR3 models:PVC-jacketed 2 m or 9 m cables, or 5-pin integral Mini-style QD (Q). QD cable are ordered separately.
Q45BW13 models:PVC-jacketed 2 m or 9 m cables, or 4-pin integral Mini-style QD (Q), depending on model. QD cable are ordered separately.
Operating ConditionsTemperature:-25° to +55° C
Relative humidity:90% @ 50° C (non-condensing)
Application NoteTransient suppression is recommended for contacts switching inductive loads. Optional logic timing modules are available.

English

Data Sheets

Document Name Part Number File Size Download
1. Q45 Series, ac/dc models
(Electromechanical Relay Output)		 53997 291K Download
2. Q45 Series, ac/dc models
(Solid-State Outputs)		 53999 270K Download
3. Q45 Series, Plug-in Logic and Display Modules
(45LM)		 63416 232K Download
4. Q45 Series, Plug-in Logic and Display Modules
(45LM..)		 37250 117K Download

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

Worldwide Distributors

Banner has more than 3,000 distributors worldwide — ready to help you. Enter a U.S. zip code

Find international distributors