| Supply Voltage and Current | 10 to 30V dc (10% max. ripple) @ less than 32 mA (exclusive of load)
|
| Supply Protection Circuitry | Protected against reverse polarity, over voltage and transient voltages
|
| Output Configuration | Bipolar:NPN (current sinking) and PNP (current sourcing)
|
| Output Rating | 100 mA max. load @ 25° C (derate 1 mA per ° C increase)
OFF-state leakage current:less than 50 µA @ 30V dc
ON-state saturation voltage:
NPN:less than 200 mV @ 10 mA; 1V @ 100 mA load
PNP:less than 1.5V @ 10 mA; 2.0V @ 100 mA load
|
| Output Protection Circuitry | Protected against output short-circuit, continuous overload, transient over-voltages, and false pulse on power up
|
| Output Response Time | 500 microseconds
|
| Repeatability | 100 microseconds
|
| Adjustments | 2 push buttons and remote wire
Push buttons or remote wire:Expert TEACH programming (two-point static, dynamic and single-point static), light operate (LO)/dark operate (DO) and OFF-delay
Push button only:manually adjust (+/-) sensitivity
Remote wire only:push-button lockout
|
| Indicators | 8-segment Red bargraph:light-to-dark signal difference relative to taught condition (single-point TEACH ); sensing contrast (two-point TEACH)
2 LED indicators:Green and Yellow
Green ON steady:power on
Yellow ON steady:output conducting
|
| Construction | PC/ABS blend plastic housing; polycarbonate cover
|
| Environmental Rating | IP67; NEMA 6
|
| Connections | 5-conductor 2 m or 9 m attached PVC cable, or 150 mm pigtail with 6-pin Euro-style QD. QD cables are ordered separately.
|
| Operating Conditions | Temperature:-10 to +55° C
Relative humidity:90% @ 50° C (non-condensing)
|