| Range | The sensor is able to detect a proper object (see below) from 2 to 15 meters, depending on model.
|
| Detectable Objects | Objects containing metal, water, or similar high-dielectric materials.
|
| Operating Principle | Frequency modulated continuous-wave (FMCW) radar
|
| Operating Frequency | 24.05 to 24.25 GHz, ISM Band (varies slightly with national telecom regulations)
|
| Supply Voltage | 12 to 30V dc, less than 100 mA, exclusive of load
|
| Supply Protection Circuitry | Protected against reverse polarity and transient overvoltages
|
| Delay at Power-up | Less than 2 seconds
|
| Output Configuration | Bipolar NPN/PNP output, 150mA;
|
| DIP switch | 7 selects N.O. (default) or N.C. operation
|
| Output Protection | Protected against short circuit conditions
|
| Indicators | Power LED: Green (power ON)
|
| Signal Strength LED: | Red, flashes in proportion to signal strength.
|
| Output LEDs: | Yellow (output energized)/Red (configuration) See Figure 2.
|
| Adjustments | DIP-switch-configurable sensitivity, sensing distance, and output configuration
|
| Construction Housing | ABS/polycarbonate
|
| Lightpipes | Acrylic
|
| Access Cap: | Polyester
|
| Operating Temperature | –40° to +65° C (–40° to +149° F)
|
| Environmental Rating | IP67
|
| Connections | Integral 5-wire 2 m (6.5') cable or M12 Euro-style QD fitting. QD models require a mating cordset; see page 4.
|
| Certifications | CE and ETSI/EN 300 440; FCC part 15; Industry Canada; for others, consult the Factory.
|