MINI-BEAM Namur DC Series

Online Learning Contact a Banner Engineer About Your Application
Product image

Overview

  • 5 to 15V dc supply voltage with a constant current output of 1 mA or less in the dark and 2 mA or less in the light condition
  • Intrinsically safe sensors with MINI-BEAM performance and small size
  • Available in opposed, polarized and non-polarized retroreflective, convergent, diffuse and divergent diffuse, and glass fiber optic sensing modes
  • For use with approved switching amplifiers with intrinsically safe input circuits
  • 18 mm threaded barrel or side mounting options

Product Specifications

Supply Voltage 5 to 15V dc (provided by the amplifier to which the sensor is connected)
RangeOpposed:6 m
Non-polarized Retroreflective:5 m, range is specified using one model BRT-3 retroreflector
Polarized Retroreflective:50 mm to 2 m, range is specified using one model BRT-3 retroreflector
Diffuse:380 mm
Divergent Diffuse:75 mm
Convergent:16 or 43 mm, depending on model
Glass Fiber Optic:Range varies by sensing mode and fiber optics used
OutputConstant current output:1 mA or less in the dark condition and 2.1 mA or less in the light condition
Output Response TimeOpposed Receiver:2 milliseconds ON; 400 microseconds OFF
All others:5 milliseconds ON/OFF (does not include amplifier response)
Ajustments15-turn slotted brass screw sensitivity (Gain) adjustment potentiometer, clutched at both ends of travel; located on rear panel of sensor and protected by a gasketed, clear acrylic cover.
IndicatorsAlignment Indicating Device system (AID) lights a rear-panel mounted red LED indicator whenever the sensor sees a light condition, with a superimposed pulse rate proportional to the light signal strength (the stronger the signal, the faster the pulse rate).
ConstructionReinforced thermoplastic polyester housing, totally encapsulated, o-ring sealing, acrylic lenses and stainless-steel screws
Environmental RatingNEMA 1, 2, 3, 3S, 4, 4X, 6, 12 and 13; IEC IP67
ConnectionsPVC-jacketed 2-conductor 2 m or 9 m cables, or special 4-pin Euro-style QD. QD cable are ordered separately.
Operating ConditionsTemperature:-40° C to + 70° C
Relative humidity:90% @ 50° C (non-condensing)
Design StandardsMIAD9 Series sensors comply with the following standards:

DIN 19 234, EN 50 014 Part 1. 1977, EN50 020 Part 7. 1977, Factory Mutual #3610 and 3611, CSA 22.2 #157-92 and 22.2 #213-M1987

English

Data Sheets

Document Name Part Number File Size Download
1. MINI-BEAM MIAD Series
(NAMUR)		 39616 1.2MB Download

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

"No more costly wiring runs"

“I’m delighted with Banner’s SureCross wireless system. It gives us comprehensive monitoring and control in previously inaccessible locations. And it’s easy to expand and relocate as needed.”

Worldwide Distributors

Banner has more than 3,000 distributors worldwide — ready to help you. Enter a U.S. zip code

Find international distributors