Q40 S2 (Bus Network) Series

Online Learning Contact a Banner Engineer About Your Application
Product image

Overview

  • Specially designed EZ-BEAM style optics and electronics for reliable sensing without adjustments
  • 10 to 30V dc with PNP output for direct connection to a bus network junction
  • 40 mm plastic housing with 30 mm threaded mounting base
  • Available in opposed, polarized retroreflective and fixed-field sensing modes
  • Marginal gain indicator with alarm output
  • Dual-LED multi-function indicators for monitoring sensor performance

Product Specifications

Supply Voltage and Current10 to 30V dc (10% max. ripple) Opposed Emitters:25 mA (exclusive of load)
Opposed Receivers:20 mA (exclusive of load)
Polarized Retroreflective:30 mA (exclusive of load)
Fixed-field:35 mA (exclusive of load)
RangeOpposed:60 m
Polarized Retroreflective:6 m, range is specified using one model BRT-3 retroreflector
Fixed-field:0-200, 0-400 or 0-600 mm cutoff, depending on models
Supply Protection CircuitryProtected against reverse polarity and transient voltages
Output Rating150 mA max. (each); the total load may not exceed 150 mA OFF-state leakage:less than 1 µA @ 30V dc
ON-state saturation voltage:less 1V @ 10 mA dc; less than 1.5V @ 150 mA dc
Output ConfigurationSensing Output:PNP (current sourcing), light operate
Alarm Output:PNP (current sourcing), normally open and conducts whenever the sensor's excess gain drops to 1-1.5x in light condition
Output Protection CircuitryProtected against false pulse on power-up and continuous overload or short-circuit of outputs
Output Response TimeResponse time is independent of signal strength Opposed:3 millisecond ON; 1.5 milliseconds OFF
Polarized Retroreflective and Fixed-field:3 milliseconds ON/OFF
Delay at Power-up100 milliseconds; outputs do not conduct during this time.
RepeatabilityRepeatability is independent of signal strength Opposed:375 microseconds
Polarized Retroreflective and Fixed-field:750 microseconds
Indicators2 LED Indicators:Green and Yellow
Green ON steady:power to sensor is ON
Green flashing:output is overloaded
Yellow ON steady:normally open output is conducting
Yellow flashing:marginal excess gain (1-1.5x) in light condition
ConstructionThermoplastic polyester housing with polycarbonate or acrylic lenses. One jam nut is included with each sensor.
Environmental RatingLeakproof design is rated NEMA 6P; IEC IP67
Connections4-pin Euro-style quick-disconnect fitting. QD cables are ordered separately.
Operating ConditionsTemperature:-40° to +70° C
Relative humidity:90% @ 50° C (non-condensing)
Vibration and Mechanical ShockAll models meet Mil. Std. 202F requirements. Method 201A (Vibration; frequency 10 to 60 Hz, max., double amplitude 0.06-inch acceleration 10G). Method 213B conditions H&I (Shock: 75G with unit operating; 100G for non-operation)

English

Data Sheets

Document Name Part Number File Size Download
1. S2 Series, dc models
(Bus Network)		 45416 251K Download

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

2012 Product Catalog

The source for all Banner product lines. Features multiple navigation options, applications and product comparisons, and detailed specifications for brackets, cordsets and other accessories.

Get it Now »

Worldwide Distributors

Banner has more than 3,000 distributors worldwide — ready to help you. Enter a U.S. zip code

Find international distributors