MINI-BEAM Namur DC Series

Online Learning Contact a Banner Engineer About Your Application
Product image

Overview

  • 5 to 15V dc supply voltage with a constant current output of 1 mA or less in the dark and 2 mA or less in the light condition
  • Intrinsically safe sensors with MINI-BEAM performance and small size
  • Available in opposed, polarized and non-polarized retroreflective, convergent, diffuse and divergent diffuse, and glass fiber optic sensing modes
  • For use with approved switching amplifiers with intrinsically safe input circuits
  • 18 mm threaded barrel or side mounting options

Product Specifications

Supply Voltage 5 to 15V dc (provided by the amplifier to which the sensor is connected)
RangeOpposed:6 m
Non-polarized Retroreflective:5 m, range is specified using one model BRT-3 retroreflector
Polarized Retroreflective:50 mm to 2 m, range is specified using one model BRT-3 retroreflector
Diffuse:380 mm
Divergent Diffuse:75 mm
Convergent:16 or 43 mm, depending on model
Glass Fiber Optic:Range varies by sensing mode and fiber optics used
OutputConstant current output:1 mA or less in the dark condition and 2.1 mA or less in the light condition
Output Response TimeOpposed Receiver:2 milliseconds ON; 400 microseconds OFF
All others:5 milliseconds ON/OFF (does not include amplifier response)
Ajustments15-turn slotted brass screw sensitivity (Gain) adjustment potentiometer, clutched at both ends of travel; located on rear panel of sensor and protected by a gasketed, clear acrylic cover.
IndicatorsAlignment Indicating Device system (AID) lights a rear-panel mounted red LED indicator whenever the sensor sees a light condition, with a superimposed pulse rate proportional to the light signal strength (the stronger the signal, the faster the pulse rate).
ConstructionReinforced thermoplastic polyester housing, totally encapsulated, o-ring sealing, acrylic lenses and stainless-steel screws
Environmental RatingNEMA 1, 2, 3, 3S, 4, 4X, 6, 12 and 13; IEC IP67
ConnectionsPVC-jacketed 2-conductor 2 m or 9 m cables, or special 4-pin Euro-style QD. QD cable are ordered separately.
Operating ConditionsTemperature:-40° C to + 70° C
Relative humidity:90% @ 50° C (non-condensing)
Design StandardsMIAD9 Series sensors comply with the following standards:

DIN 19 234, EN 50 014 Part 1. 1977, EN50 020 Part 7. 1977, Factory Mutual #3610 and 3611, CSA 22.2 #157-92 and 22.2 #213-M1987

English

Data Sheets

Document Name Part Number File Size Download
1. MINI-BEAM MIAD Series
(NAMUR)		 39616 1.2MB Download

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

Looking for CAD Files?

Browse by model family or type in your model number to find STEP, IGS, DXF, or PDF files for your project.

Find them now »

Worldwide Distributors

Banner has more than 3,000 distributors worldwide — ready to help you. Enter a U.S. zip code

Find international distributors