웹 및 가장자리 모니터링

많은 산업에서 중요한, 신뢰할 수 있는 웹 및 에지 가이딩은 기계 공정을 거치는 제품이 막힘 없이 계속 흐르도록 하고, 가동 중지 시간을 최소화하고, 자재 손상 및 손실을 방지합니다. 라인에서 이동할 때 웹을 측정하여 웹을 모니터링 및 제어하는 데 주로 센서가 사용됩니다. 자재 텍스처, 반사율 및 투명도와 고속으로 작동하는 장비로 인해 센서가 자재를 감지 및 측정하기가 어려울 수 있습니다. 광범위한 센서 기술 분야에 대한 전문 지식 덕분에 Banner는 웹 자재를 일관되고 정확하게 측정하는 센서를 공급해 시스템 전체에서 생산 라인에서의 끊김 없는 흐름을 유지할 수 있도록 합니다.

결과 범위 좁히기

모든 필터 지우기

Product Type

  • (4)
  • (1)

산업

  • (2)
  • (1)
  • (1)
  • (1)

Back To Top

선택 필터
  1. Pick and Place Machine Leading Edge Detection

    Fiber optics are an ideal solution for pick and place machines because of their small size. DF-G1 amplifiers can be separated from fibers so the operator has easy access to the digital dual-display screen for data monitoring. Additionally, the cross talk avoidance algorithm allows two or more amplifiers to operate in close proximity to each other.

  2. Sizing, Profiling and Guiding Clear Objects

    Banner Engineering has created a special class of EZ-ARRAYs specifically designed to detect clear objects in clean industrial environments. By customizing standard EZ-ARRAY receivers to successfully detect low contrast and operate at a lower sensing range (30 to 1500 mm), Banner has enabled EZ-ARRAY Clear Object Measuring Light Curtains to detect translucent objects such as glass and clear webbing.

  3. Leading Edge Detection of Packages with a Thin, Flexible Edge

    Banner’s LX Series is an economical solution for detecting the leading edge of flat objects, such as the frozen dinner containers. With a web of modulated light, the LX Series part-sensing light screen can detect any item—in any position—passing through the light screen.

  4. Carpet Web Detection

    It's much easier and more cost-effective to measure and monitor these transitions while the web is running than risk expensive waste in post-manufacturing inspections. As the carpet web passes through a pair of EZ-ARRAY measuring light curtains, the two sticks configured for Nap Detection mode monitor the process in action. The EZ-ARRAY detects the selvage edge and tufting edge and sends data to the web control system, which can then make necessary adjustments to keep the carpet in line.

  5. Ply Orientation Inspection

    Before the operator activates a tire-building machine to form a tire, a PresencePLUS P4 OMNI 1.3 vision sensor inspects the plies to make sure that pieces with opposite biases alternate in the stack. If two pieces with the same bias are stacked together, the formed tire proceeds through the manufacturing process, then fails balance testing and must be scrapped.