.psd/jcr:content/renditions/cq5dam.thumbnail.319.319.png)
SGS - Safety Grid System
SGS Safety Grid Systems are cost-effective multiple beam safety light devices for access and long-range perimeter guarding applications.
Learn More About the SGS Safety Grid System
SGS Safety Grid System
Light grids are suited to a variety of access and long-range perimeter guarding applications. Uses 2, 3, or 4 beams to protect personnel and machinery.
Transcript
Introducing the new SGS Safety Grid System by Banner Engineering.
Banner’s SGS Safety Grid System has a heavy-duty aluminum housing and provides a low-cost perimeter guarding solution for tough environments.
Installation is made simple with on-board alignment lamp and indicators.
Emitter/Receiver models are available as well as Active/Passive models for reduced wiring and cost.
With a range of up to 60 meters, and 2, 3 and 4 beam heights to choose from, Banner’s new Safety Grid System can be used in a wide range of perimeter guarding applications.
Additionally, for end of line packaging applications Banner offers SGS models with integral muting. These models can be paired with SGS mute arm kits for a turn-key solution.
The pre-assembled mute arm kits have multiple configurations and simply plug-n-play connect directly to the SGS Safety Grid.
Material can pass through in mute mode without stopping operations and protects from entry when not muted.
SGS Safety Grid System from Banner Engineering.
Related Videos
LS Safety Light Curtain with IP69K Hygienic Enclosure
LS safety light curtains are available with an IP69K hygienic enclosure that resists high-pressure, high-temperature washdown and aggressive chemical cleaning. They are ideal for use in food, beverage, and pharmaceutical applications where maintaining sanitary conditions is critical.
SX5-B Safety Laser Scanners
Compact and easy-to-deploy, SX5 Series safety laser scanners protect personnel, equipment, and mobile systems within a user-defined area. They continuously scan a 275° area to create a two-dimensional protected zone that must be crossed to reach the hazard.
E-Stop Removing and Installing Contact Block
In this tutorial, we will demonstrate how to remove and install a contact block. This tutorial video is meant as a reference tool only. It was created as a guide to help you through the general steps involved during the installation process. It is important that you read and follow the written installation instructions included with the product and manual found online at BannerEngineering.com.