-
Products
-
Machine Safety
-
Safety Controls
-
ES and GM Series E-Stop and Guard Monitoring Safety Relays
E-Stop & Guard Monitoring Safety Relays
- Modules monitor up to 10 external devices for contact failure or wiring faults
- Module goes into lockout mode if it detects a fault
- Available voltages include 24V dc 24V ac/dc 115V ac or 12 to 24V dc or 230V ac or 12 to 24V ac/dc
- Modules monitor positive-opening E-stop and interlock switches
- Models are available with 2 to 4 normally open safety outputs, depending on module
- Safety outputs are rated 4 or 6 amps, depending on module
- Non-safety auxiliary outputs are available on most modules
- Two modules allow central monitoring and control over a DeviceNet control network
- Ratings are NEMA 1 and at least IEC IP20
- Housings are rugged polycarbonate
- Bright red and green LED indicators show modules operating status
ES and GM Series E-Stop and Guard Monitoring Safety Relays
Incomplete Checkout
Share Your Checkout Experience
We noticed you didn’t finish your online checkout. We're dedicated to providing the best shopping experience possible and would love to hear if you faced any challenges. Let us know how we can make your experience even better.
Downloads
English Documents
English Documents
English Documents
-
ES-FA-9AA
Safety Relay Module for E-Stop/Rope Pull/Interlock
Supply Voltage: 24 V ac/dc
Safety Input: 1 Dual/Single Channel
Safety Output: 3 NO, 6 A; Aux Output: None
Terminal Block: Removable; Width: 22.5 mm
Self-Checking Circuitry, Auto/Manual Reset -
ES-UA-5A
Safety Relay Module for E-Stop/Rope Pull/Interlock
Supply Voltage: 115 V ac or 12-24 V dc
Safety Input: 1 Dual/Single Channel
Safety Output: 4 NO, 6 A; Aux Output: 1 NC, 5 A and 2 Solid-State 0.1 A
Terminal Block: Removable; Width: 45 mm
Self-Checking Circuitry, Auto/Manual Reset -
ES-FA-11AA
Safety Relay Module for E-Stop/Rope Pull/Interlock
Supply Voltage: 24 V ac/dc
Safety Input: 1 Dual/Single Channel
Safety Output: 2 NO, 7 A; Aux Output: 1 NC, 7 A
Terminal Block: Removable; Width: 22.5 mm
Self-Checking Circuitry, Auto/Manual Reset -
GM-FA-10J
Safety Relay Module for Interlocks
Supply Voltage: 24 V ac/dc
Safety Input: Interlocks with complementary contacts
Safety Output: 2 NO, 6 A; Aux Output: None
Terminal Block: Removable; Width: 22.5 mm
Self-Checking Circuitry, Auto/Manual Reset -
ES-FA-6G
Safety Relay Module for E-Stop/Rope Pull/Interlock
Supply Voltage: 24 V ac/dc
Safety Input: 1 Single Channel
Safety Output: 3 NO, 6 A; Aux Output: 1 NC, 6 A
Terminal Block: Fixed; Width: 22.5 mm
Self-Checking Circuitry, Auto/Manual Reset -
ES-VA-5A
Safety Relay Module for E-Stop/Rope Pull/Interlock
Supply Voltage: 230 V ac or 12-24 V dc
Safety Input: 1 Dual/Single Channel
Safety Output: 4 NO, 6 A; Aux Output: 1 NC, 5 A and 2 Solid-State 0.1 A
Terminal Block: Removable; Width: 45 mm
Self-Checking Circuitry, Auto/Manual Reset
Have a Technical Question?
Our application engineers are here to help with expert guidance and support. Send us your inquiry, and we’ll get back to you as soon as possible. We’re here to make sure you get the answers you need.