.psd/jcr:content/renditions/cq5dam.thumbnail.319.319.png)
Interface Safety Relays
Cost-effective interface modules providing isolated safety output contacts for safety light curtains or similar primary safety devices with OSSD solid-state or hard contact outputs and external device monitoring (EDM) capability.
- Clearly labeled, front facing push-in style spring clamp terminals
- Can be used to expand the available outputs of a safety controller and increase the switching current capacity of low voltage safety devices to 6 amps
- Models available with three normally open (NO) safety outputs or two normally open (NO) safety outputs and one normally closed (NC) non-safety auxiliary output
- 22.5 mm (0.9 inch) DIN-rail-mountable housing
- Achieves up to SIL 3 (IEC 61508/IEC 62061) and Category 4, PLe (EN ISO 13849-1)
- 20 millisecond maximum response time
- 24 V dc operation
Downloads
Technical Literature
Date
Type
Size
Date
Type
Size
Date
Type
Size
Date
Type
Size
Marketing Literature
Date
Type
Size
selected filters
-
SR-IM-9A
Relay Module for Safety Light Curtain/Control with EDM
Supply Voltage: 24 V dc
Safety Input: 1 Dual/Single Channel
Safety Output: 3 NO, 6 A; Aux Output: None
Spring Clamp Terminals; Width: 22.5 mm -
SR-IM-11A
Relay Module for Safety Light Curtain/Control with EDM
Supply Voltage: 24 V dc
Safety Input: 1 Dual/Single Channel
Safety Output: 2 NO, 6 A; Aux Output: 1 NC, 6 A
Spring Clamp Terminals; Width: 22.5 mm