Need More Information?
Our Experts are available to help you find the right vibration monitoring system!
New Products | news
Success Story | news
Success Story | news
Success Story | news
New Products | news
New Products | news
New Products | news
New Products | news
New Products | news
New Products | news
New Products | news
Success Story | DXM
Success Story | Wireless Solutions
Success Story | Wireless Gateways and Nodes
Success Story | QS18
Success Story | R58
Success Story | Smart Sensors
Success Story | IRIS
Success Story | CL50
Success Story | IVU
Success Story | IVU
Success Story | PTL110
Success Story | PTL110
Success Story | PTL Products
Success Story | WLB32
Success Story | K50L
Success Story
Success Story | K50FL
Success Story | LE
Success Story
Success Story | WLA
Success Story | Lenses
Success Story | T30R
Success Story | QT50R
Success Story | Wireless M-GAGE Node
Identify equipment problems early before a failure can occur by monitoring the health of motors, fans, pumps, and other rotating equipment. Banner’s wireless vibration monitoring solutions make it easy and cost effective to monitor a variety of vibration characteristics and set warning and alarm thresholds, as well as collect vibration data over time for trending and analysis.
Businesses benefit from several key advantages:
Our Experts are available to help you find the right vibration monitoring system!
For a simplified setup, Banner’s Vibration Monitoring Solutions Kit comes with a pre-programmed DXM controller and HMI. The Solutions Kit makes it easy for a user of any level to set up the wireless network, establish baselines and thresholds, and visually create “check engine lights” on the HMI.
Sensor + Node
The Q45VAC combines a VT1 vibration and temperature sensor, a Q45VTP wireless node, and a battery power supply in one compact and completely wireless device.
All-in-one vibration and temperature sensor and node
Just one part to order and install
Uses a 1-wire serial interface
Controller + HMI
Fully integrated and easy-to-use solutions to solve specific applications like vibration monitoring.
No programming required
Includes pre-programmed DXM controller and HMI
Access data directly on the HMI or send to the network or the cloud to access remotely
1-Wire Serial Sensor
QM30VT Series sensors have a low-profile design and rigid metal construction that reduces resonant interference and increases surface contact, enabling exceptional levels of accuracy in measuring RMS velocity and temperature.
Communicates performance data using a MultiHop Modbus Radio or 1-Wire Serial Node to a DXM Series wireless controller or gateway
Detects potential problems on motors, fans, pumps, and any machine with rotating motion or vibration
Ultracompact design fits easily in small spaces
Sensor + Node
Controller + HMI
1-Wire Serial Sensor
The Q45VAC combines a VT1 vibration and temperature sensor, a Q45VTP wireless node, and a battery power supply in one compact and completely wireless device.
Fully integrated and easy-to-use solutions to solve specific applications like vibration monitoring.
QM30VT Series sensors have a low-profile design and rigid metal construction that reduces resonant interference and increases surface contact, enabling exceptional levels of accuracy in measuring RMS velocity and temperature.
All-in-one vibration and temperature sensor and node
Just one part to order and install
Uses a 1-wire serial interface
No programming required
Includes pre-programmed DXM controller and HMI
Access data directly on the HMI or send to the network or the cloud to access remotely
Communicates performance data using a MultiHop Modbus Radio or 1-Wire Serial Node to a DXM Series wireless controller or gateway
Detects potential problems on motors, fans, pumps, and any machine with rotating motion or vibration
Ultracompact design fits easily in small spaces
Sensor and Node
The Q45VAC combines a VT1 vibration and temperature sensor, a Q45VTP wireless node, and a battery power supply in one compact and completely wireless device.
All-in-one vibration and temperature sensor and node
Just one part to order and install
Uses a 1-wire serial interface
1-Wire Serial Sensor
Works in a variety of machines to identify and predict failures in rotating machinery. Detects dual-axis vibration and provides high accuracy vibration and temperature measurements.
Measures multiple vibration characteristics and temperature
One vibration sensor to one node
Uses a 1-wire serial interface
Modbus Sensor
Works in a variety of machines to identify and predict failures in rotating machinery. Detects dual-axis vibration and provides high accuracy vibration and temperature measurements.
Measures multiple vibration characteristics and temperature
Functions as a Modbus slave device via RS485
Can be connected via a wireless or wired Modbus network
Sensor and Node
1-Wire Serial Sensor
Modbus Sensor
The Q45VAC combines a VT1 vibration and temperature sensor, a Q45VTP wireless node, and a battery power supply in one compact and completely wireless device.
Works in a variety of machines to identify and predict failures in rotating machinery. Detects dual-axis vibration and provides high accuracy vibration and temperature measurements.
Works in a variety of machines to identify and predict failures in rotating machinery. Detects dual-axis vibration and provides high accuracy vibration and temperature measurements.
All-in-one vibration and temperature sensor and node
Just one part to order and install
Uses a 1-wire serial interface
Measures multiple vibration characteristics and temperature
One vibration sensor to one node
Uses a 1-wire serial interface
Measures multiple vibration characteristics and temperature
Functions as a Modbus slave device via RS485
Can be connected via a wireless or wired Modbus network
1-Wire Serial Nodes
Q45 1-Wire Serial Nodes are designed to pair with the VT1 vibration sensors.
Vibration characteristics and sample intervals can be set using DIP switches
Easy to use without software
1-Wire Serial Nodes
An I/O radio network that combines long range line-of-sight coverage with ease of deployment and use.
Cover large areas with 900 MHz, 1-watt power
Expandable wireless network as needs change
MultiHop Modbus Radios
MultiHop Modbus Data Radios extend the range of Modbus or other serial communication networks.
Use repeaters to extend range, circumvent obstacles
Expandable wireless network as needs change
Modbus host controller required
1-Wire Serial Nodes
1-Wire Serial Nodes
MultiHop Modbus Radios
Q45 1-Wire Serial Nodes are designed to pair with the VT1 vibration sensors.
An I/O radio network that combines long range line-of-sight coverage with ease of deployment and use.
MultiHop Modbus Data Radios extend the range of Modbus or other serial communication networks.
Vibration characteristics and sample intervals can be set using DIP switches
Easy to use without software
Cover large areas with 900 MHz, 1-watt power
Expandable wireless network as needs change
Use repeaters to extend range, circumvent obstacles
Expandable wireless network as needs change
Modbus host controller required
Controller and HMI
Fully integrated and easy-to-use solutions to solve specific applications like vibration monitoring.
No programming required
Includes pre-programmed DXM controller and HMI
Access data directly on the HMI or send to the network or the cloud to access remotely
Controller with Performance Radio
If you have selected the Q45 all-in-one or a VT1 sensor, you must select a DXM with a Performance Radio.
Industrial wireless controller that facilitates Industrial Internet of Things (IIoT) applications
High performance wireless communication with Performance Gateway
Controller with MultiHop Modbus Radio
If you have selected a VT2 Modbus Sensor, you must select a DXM with a MultiHop Modbus radio.
Industrial wireless controller that facilitates Industrial Internet of Things (IIoT) applications
High performance wireless communication with MultiHop Modbus Radio
Controller and HMI
Controller with Performance Radio
Controller with MultiHop Modbus Radio
Fully integrated and easy-to-use solutions to solve specific applications like vibration monitoring.
If you have selected the Q45 all-in-one or a VT1 sensor, you must select a DXM with a Performance Radio.
If you have selected a VT2 Modbus Sensor, you must select a DXM with a MultiHop Modbus radio.
No programming required
Includes pre-programmed DXM controller and HMI
Access data directly on the HMI or send to the network or the cloud to access remotely
Industrial wireless controller that facilitates Industrial Internet of Things (IIoT) applications
High performance wireless communication with Performance Gateway
Industrial wireless controller that facilitates Industrial Internet of Things (IIoT) applications
High performance wireless communication with MultiHop Modbus Radio