Rope-pull stop control devices provide non-safety-rated machine stop actuation.
- Available maximum spans range from 6 to 100 m
- Trip and latch switch models are available
- Minimum switch life is 1 million operations
- Heavy-duty metal or plastic housings withstand harsh environments
- Switch activates if the rope is pulled, becomes loose, or breaks
- Design meets positive opening requirements for rope-pull switches
Downloads
Technical Literature
Brochures & Catalogs
Application Notes
Emergency Indication on Conveyors
Banner’s RP-LS42 safety rope pulls line conveyors as a way to indicate emergencies and immediately shut down conveyors. If a rope pull is used during an emergency, it can be difficult to locate exactly where it was pulled. A K30 indicator light can be paired with the rope pulls in order to provide indication as to where the rope was pulled. This allows for quick and easy indication of where an emergency occurred, helping to return to normal operations as fast as possible.
Emergency Stopping (center-mounted rope pull)
The pull rope runs along the length of a conveyor so the operator can grab and pull it from anywhere along its length to immediately stop the conveyor.