30 mm'lik Montaj Tabanlı Acil Stop Butonları
Patented 30 mm mounting base enables easy installation and hookup with no assembly, individual wiring or additional enclosure required.
- Available with two-color: yellow and red, one color: red, or a non-illuminated black base
- Reduces intensive labor costs with a fully enclosed E-Stop button ready for installation
- Multiple buttons can be wired in series, with built-in logic allowing for clear indication of pushed button
- Latching design complies with ISO 13850 direct (positive) opening operation per IEC 60947-5-1
- Rugged design rated to IP65
- Available with illuminated Safety BUS Gateway compatibility
Patentli 30 mm'lik montaj tabanı sayesinde kolay kurulum imkanı sunar.
- İki renkli olarak Sarı veya yeşil; tek renkli olarak ise Kırmızı veya aydınlatmasız siyah tabanlı seçenekleri mevcuttur
- Kuruluma hazır halde gelir
- Birden fazla buton seri olarak birbirine bağlanabilir
- Kilitlenebilir özelliği IEC 60947-5-1 uyarınca ISO 13850 doğrudan açılma operasyonu ile uyumludur
- Dayanıklı ve IP65 koruma sınıfına sahip tasarım
- Işıklı Emniyet BUS Gateway ile uyumludur
Downloads
Teknik Literatür
Broşürler ve Kataloglar
Videos
-
![Washdown Cover for Emergency Stop Buttons [Video]](/content/dam/banner-engineering/projects/video-thumbnails/E-Stop_Cover_Video_Thumbnail-new.psd/jcr:content/renditions/cq5dam.web.1280.1280.jpeg)
Washdown Cover for Emergency Stop Buttons [Video]
Banner Engineering’s new Washdown Cover expands the number of applications for which our E-Stop Buttons can be used by raising the product rating up to IP69K and Type 4X. It provides additional protection against environmental hazards for our 30 mm Mount Emergency Stop Buttons without compromising device actuation or visibility. The cover is made of clear, FDA-grade silicone and is both UL and ECOLAB approved. It is available in pre-installed kits for rapid deployment in new installations or as a standalone product, ideal for retrofitting E-Stop buttons in existing installations.
-
In-Series Diagnostics Demo
Learn how easy it is to implement and use a complete In-Series Diagnostics safety system.
Our most commonly requested models are available below. For all other configurations, contact a Banner sales representative. Minimum order quantities may apply.
-
SSA-EB1PLXR-02ECQ5B
SSA-EB1 30 mm Mount Emergency Stop Push Button
Red-Flash Illuminated Base; 40 mm Actuator
IP65; Contacts: 2 NC; 5-pin M12 Integral QD
Safety BUS Node Compatible CH1=pins1&4 CH2=pins2&5 -
SSA-EB1PLYR-02ECQ5A
SSA-EB1 30 mm Mount Emergency Stop Push Button
Yellow, Red Flash Illuminated Base; 40 mm Actuator
IP65; Contacts: 2 NC; 5-pin M12 Integral QD
Safety BUS Node Compatible CH1=pins1&2 CH2=pins4&5 -
SSA-EB1PLXR-12ECQ8
SSA-EB1 30 mm Mount Emergency Stop Push Button
Red Solid/Flashing Illuminated Base
40 mm Actuator
IP65; Contacts: 2NC/1NO-PNP; 8-pin M12 Integral QD -
SSA-EB1PL-02ECQ5A
SSA-EB1 30 mm Mount Emergency Stop Push Button
Red-Solid Illuminated Base; 40 mm Actuator
IP65; Contacts: 2 NC; 5-pin M12 Integral QD
Safety BUS Node Compatible CH1=pins1&2 CH2=pins4&5 -
SSA-EB1PL-12ECQ8
SSA-EB1 30 mm Mount Emergency Stop Push Button
Red-Solid Illuminated Base; 40 mm Actuator
IP65; Contacts: 2NC/1NO-PNP; 8-pin M12 Integral QD -
SSA-EB1PLYR-12ECQ8-WC
SSA-EB1 30 mm Mount Emergency Stop Push Button
Yellow and Red Solid/Flashing illuminated Base
40 mm Actuator; IP69K; Contacts: 2NC/1NO-PNP; 8-pin M12 Integral QD
Includes SSA-EB1P-ECWC Washdown Cover -
SSA-EB1PLXR-02ECQ5A
SSA-EB1 30 mm Mount Emergency Stop Push Button
Red-Flash Illuminated Base; 40 mm Actuator
IP65; Contacts: 2 NC; 5-pin M12 Integral QD
Safety BUS Node Compatible CH1=pins1&2 CH2=pins4&5 -
SSA-EB1PL-02ECQ5B
SSA-EB1 30 mm Mount Emergency Stop Push Button
Red-Solid Illuminated Base; 40 mm Actuator
IP65; Contacts: 2 NC; 5-pin M12 Integral QD
Safety BUS Node Compatible CH1=pins1&4 CH2=pins2&5 -
SSA-EB1PLGR-12ECQ8
SSA-EB1 30 mm Mount Emergency Stop Push Button
Green and Red Flash/Solid Illuminated Base
40 mm Actuator
IP65; Contacts: 2NC/1NO-PNP; 8-pin M12 Integral QD -
SSA-EB1PLYR-12ECQ8
SSA-EB1 30 mm Mount Emergency Stop Push Button
Yellow, Red Solid/Flashing Illuminated Base
40 mm Actuator
IP65; Contacts: 2 NC/1 NO-PNP; 8-pin M12 Integral QD -
SSA-EB1PLGR-12ECQ8-WC
SSA-EB1 30 mm Mount Emergency Stop Push Button
Green and Red Flash/Solid Illuminated Base
40 mm Actuator; IP69K; Contacts: 2NC/1NO-PNP; 8-pin M12 Integral QD
Includes SSA-EB1P-ECWC Washdown Cover -
SSA-EB1P-02ECQ4C
SSA-EB1 30 mm Mount Emergency Stop Push Button
Non-Illuminated Base; 40 mm Actuator
IP65; Contacts: 2NC; 4-pin M12 Integral QD
Safety BUS Node Compatible CH1 = PINS 1&2, CH2 = PINS 3&4 -
SSA-EB1PL2-02ECQ5B
SSA-EB1 30 mm Mount Emergency Stop Push Button
Non-Illuminated Base; Illuminated (PUSH ON) 40 mm Actuator
IP65; Contacts: 2NC; 5-pin M12 Integral QD
Safety BUS Node Compatible CH1=pins1&4 CH2=pins2&5 -
SSA-EB1PL-12ECQ8-WC
SSA-EB1 30 mm Mount Emergency Stop Push Button
Red-Solid illuminated base; 40 mm Actuator
IP65; Contacts: 2NC/1NO-PNP; 8-pin M12 Integral QD
Includes SSA-EB1P-ECWC Washdown Cover -
SSA-EB1PL2-02ECQ5A
SSA-EB1 30 mm Mount Emergency Stop Push Button
Non-Illuminated Base; Illuminated (PUSH ON) 40 mm Actuator
IP65; Contacts: 2NC; 5-pin M12 Integral QD
Safety BUS Node Compatible CH1=pins1&2 CH2=pins4&5 -
SSA-EB1PLXR-12ECQ8-WC
SSA-EB1 30 mm Mount Emergency Stop Push Button
Red Solid/Flashing illuminated Base
40 mm Actuator; IP69K; Contacts: 2NC/1NO-PNP; 8-pin M12 Integral QD
Includes SSA-EB1P-ECWC Washdown Cover -
SSA-EB1PLGR-02ECQ5B
SSA-EB1 30 mm Mount Emergency Stop Push Button
Green, Red Flash Illuminated Base; 40 mm Actuator
IP65; Contacts: 2 NC; 5-pin M12 Integral QD
Safety BUS Node Compatible CH1=pins1&4 CH2=pins2&5 -
SSA-EB1PLGY-12ECQ8
SSA-EB1 30 mm Mount Emergency Stop Push Button
Green and Yellow Solid/Flashing Illuminated Base
40 mm Actuator
IP65; Contacts: 2 NC/1 NO-PNP; 8-pin M12 QD -
SSA-EB1PLYR-02ECQ5B
SSA-EB1 30 mm Mount Emergency Stop Push Button
Yellow, Red Flash Illuminated Base; 40 mm Actuator
IP65; Contacts: 2 NC; 5-pin M12 Integral QD
Safety BUS Node Compatible CH1=pins1&4 CH2=pins2&5 -
SSA-EB2PLXR-12ECQ8
SSA-EB2 30 mm Mount Emergency Stop Push Button
Red Solid/Flashing Illuminated Base
60 mm Actuator
IP65; Contacts: 2NC/ 1 NO-PNP; 8-pin M12 QD