QL56 Serisi

Dayanıklı Gövdeye Sahip Lüminesans Sensörü

QL56 Series Luminescence Sensor
QL56 Series Luminescence Sensor
QL56 - Grease Pencil Mark Detection On Lumber
QL56 Plastic Wrap on Can Detection
QL56 and QL51 Syringe Inspection

Reliably detects luminescent plastics, coatings, lubricants, and marks on irregular or reflective surfaces. Housed in IP67-rated aluminum housing for use in rugged industrial environments.

  • High-power UV emission provides a consistent beam for improved sensitivity and reliable detection
  • Emitted spot is a line of light formed by 6 UV LEDs
  • Three push buttons to adjust the sensor’s switch point sensitivity and enable or disable a 20 ms off delay
  • Variable operating distance depending on model: 15, 30, or 40 mm
  • 5 position swivel QD connector to accommodate cramped mounting situations

Parlak plastik, kaplama, yağlayıcı madde ve yansıtıcı yüzeylerin üzerindeki işaretleri algılar. Endüstriyel ortamlarda kullanım amaçlı IP67 koruma sınıflı alüminyum gövdeye sahiptir.

  • Yüksek güçlü UV ışık, yüksek hassasiyet sunar
  • 6 adet UV LED'den oluşan ışık demeti
  • Sensörün hassasiyetini ayarlamak ve 20 msn'lik çıkış gecikmesini etkinleştirmek veya devre dışı bırakmak için üç adet buton
  • Modele göre değişen çalışma mesafesi: 15, 30 veya 40 mm
  • Farklı montaj durumlarına uyum sağlayacak 5 pozisyonlu döner QD konnektör

Teknik Literatür

Tarih
Tip
Boyut
QL56 Series Luminescence Sensor
28 Sep 2015
Teknik Döküman
1.9MB
Bir Metal Kutu Üzerindeki Plastik Filmi Algılamak
Bir Metal Kutu Üzerindeki Plastik Filmi Algılamak

Gösterilen uygulamada, kapağı ve metal kutunun tepesini saran plastik filmin birkaç işlev vardır: Kutu üzerinde bir mühür görevi görür, taşıma sırasında kapağın çıkmasını önler ve lüminesans özelliği sayesinde özel bir sensörle algılanabilir. Buna ilave olarak, ürünün kutudan dökülmesini önler. Bu nedenlerle plastik filmi olmayan kutuların reddedilmesi önemlidir.

Read More
Detecting Plastic Wrap on a Can
Detecting Plastic Wrap on a Can

In the application shown, the plastic wrap surrounding the cap and the top of the can serves several purposes: it acts as a tamper-proof seal on the can, it prevents the cap from disconnecting during transit, and it holds the applicator tool to the can. Additionally, the plastic serves as error-proofing to protect customers from spilling the contents before they are ready to use it. For these reasons it is important that cans without the plastic wrap are rejected.

Read More
Ürün Seçimi
Kütüphaneme Ekle
Eklendi