SPXLP1
Item Detail Single Beam Safety Light Devices
ALERT:
This part is obsolete. Contact Banner Engineering for information about selecting a suitable replacement.
Certifications
Compatible Amplifiers
Where applicable, maximum range for opposed mode fibers is also dependent on fiber length.
Accessories to Complete Your System
Add all or individual items to your cart. More options available below.
Specifications
- Low Profile
- No
- Max Operating Range (m)
- >20
- Defined Area Height Range (mm)
- <=350
- IP Rating
- IP65
- Supply Voltage
- 24 V dc
- Primary Housing Material
- Aluminum
- Safety Level
- Type 4
- Effective Aperture Angle
- Type 4 Per IEC 61496-2
- Connector Type
- Wiring Chamber
- Defined Area Height (mm)
- 25
- Dimensions WxD (mm)
- 52 x 55
- Overall Length (mm)
- 149
- External Monitoring Device
- 1 or 2 Channel
- Fixed Blanking
- No
- Housing Finish
- Yellow Polyester
- Operating Distance (m)
- 15 - 70
- Operating Voltage
- 24 V dc +/- 15%
- Operating Temperature
- 0 to +55 deg. C; RH 95%
- PL Rating
- N/A
- Recovery Time
- N/A
- Resolution (mm)
- 1 - 25
- Reduced Resolution
- No
- Response Time
- 24
- Electrical Safety Class
- III
- Scan Code
- Selectable
- Shock
- 10g at 16ms (6000 cycles)
- Short Protection
- Yes
- System Type
- Emitter/Receiver Pair
- Vibration
- 10-55 Hz at 0.35 mm
- Auxiliary Output
- No
- Fault Output
- No
- Housing Material
- Aluminum; PBT; Acrylic
- OSSD Rating
- 24 V dc at 0.5 A each
- Supply Current
- 600 mA max.
- Trip/Latch Output
- Selectable
- Test Input
- Yes
SPXLP1
Item Detail: Single Beam Safety Light Devices