One Piece Part Verification Array Pick-to-Lights: PVD Series
- Patent-pending, easy-to-use sensor is suited to many part assembly, pick-to-light, and error-proofing applications.
- One-piece self-contained sensor requires no controller.
- Sensor automatically operates in either diffuse or retroflective mode, depending on the application.
- Supply voltage is 12 to 30V dc.
- Output is NPN or PNP selectable using DIP switches.
- Setup and adjustment are automated.
- Wide beam pattern simplifies alignment.
- Large green job lights initiate users action, job lights turn red to indicate errors.
- Two lengths fit existing bin sizes and configurations.
Downloads
Technical Literature
Marketing Literature
Application Notes
Pallet Detection for Conveyance Equipment
A leading manufacturer of conveying equipment designs and builds high-quality, low-cost conveyance solutions. The pallet equipment they develop is expected to reliably convey, palletize and depalletize thousands of pallets and unit loads annually. This equipment must be able to sense a wide range of different pallet types and sizes to ensure the proper packing and unpacking of pallets and avoid line slow-downs, pallet crashes and collapses.
![Detecting Parts Ejected from Die [Success Story]](/content/dam/banner-engineering/3d-renders/application-notes/wcc-migration/2012/PVD-Part-Out.psd/jcr:content/renditions/cq5dam.thumbnail.319.319.png)
Detecting Parts Ejected from Die [Success Story]
In the manufacturer's facility, operators manually insert and remove metal parts from the die press. When complete, the parts are sent into a bin via a metal chute. In order to prevent die crash (having double parts in the press at once) the customer needed a sensor that could detect various parts on the chute and send a signal to the control system, indicating that the press is free and allowing the operator to perform another stroke. The solution needed to be installed without cutting slots in the chute sides or mounting sensors at the end of the chute, which could create catch points for traveling parts.
Accurate Pallet Detection
Banner’s PVD100 is a custom-made solution that accurately detects pallets without adjustments, even when features are inconsistent. This easy-to-use, versatile light screen has a wide beam pattern, making alignment simple. With a compact design, it can easily be embedded into a machine or directly on the line. The PVD100 light screen sensing solution has a detection height of 100 mm and a scanning range of 2 m. It has highly visible red and green LED lighting to display operation and indicate
Moveable Bracket
The optional bracket for a one-piece EZ-LIGHT PVD pick-to-light sensor makes it possible to detach the sensor and snap it onto a different rack.
Order Fulfillment: Wide Shelf
Each wide shelf is equipped with a one-piece EZ-LIGHT PVD pick-to-light sensor in retroreflective mode, which has a range of up to 2 m. The PVD lights up on the bin from which the worker should select the map to ship.
![Operator Guidance Solution [Success Story]](/content/dam/banner-engineering/3d-renders/application-notes/wcc-migration/2013/PVD_QS30LE_OTB_K50L_Bin-Pick-for-Transmission-Plate.psd/jcr:content/renditions/cq5dam.thumbnail.319.319.png)
Operator Guidance Solution [Success Story]
A Henshaw customer manufactures drivetrain and powertrain systems for the automotive industry. The company had experienced productivity losses due to errors in the assembly of transmission valve bodies. Henshaw was tasked with developing a system that would reduce errors and improve the assembly process.
Pick-to-Light Solutions
Several technologies and solutions are available for bin-picking applications for error-proofing processes. Light arrays prompt the operator for part selection with integral job lights, then reliably sense retrieval of the part, using an array of visible red or infrared sensing beams located in front of the bin.
Part Pick Verification for Large Bins
To reduce the risk of error in an assembly operation, a one-piece EZ-LIGHT PVD pick-to-light sensor is placed on the top rail of a shelf, looking down on the shelf opening. The PVD is interfaced with a process controller that is programmed to illuminate the PVD on the bin to pick. After the PVD detects that the assembler's hand has entered and left the bin, the controller signals the PVD on the next bin to pick.
Bin Picking for Order Fulfillment
In a book packing warehouse, the rack above each carton of books is equipped with a one-piece EZ-LIGHT PVD pick-to-light sensor. A worker fills orders by selecting the quantity of each book specified on the packing slip. To make it easier for the worker to find the cartons from which to pick books, the PVDs above those cartons are illuminated. The PVD detects the workers hand in the carton to verify that the title was picked.
-
PVD100Q
PVD Series: Parts Verification
100 mm 4 channel; Range; up to 2 m,
Input:12-30 V dc
Outputs: Selectable NPN/PNP
5-pin 2 m Quick-Disconnect Pigtail -
PVD225Q
PVD Series: Parts Verification
225 mm 8 channel; Range; up to 2 m,
Input:12-30 V dc
Outputs: Selectable NPN/PNP
5-pin 2 m Quick-Disconnect Pigtail -
PVD100
PVD Series: Parts Verification
100 mm 4 channel; Range; up to 2 m,
Input:12-30 V dc
Outputs: Selectable NPN/PNP
2 m (6.5 ft) Cable -
PVD225 W/30
PVD Series: Parts Verification
225 mm 8 channel; Range; up to 2 m,
Input:12-30 V dc
Outputs: Selectable NPN/PNP
9 m (30 ft) Cable -
PVD225
PVD Series: Parts Verification
225 mm 8 channel; Range; up to 2 m,
Input:12-30 V dc
Outputs: Selectable NPN/PNP
2 m (6.5 ft) Cable -
PVD225MA1Q W/6IN
PVD Series: Parts Verification
225 mm 8 channel; Range; up to 2 m,
Input:12-30 V dc
Outputs: Selectable NPN/PNP
Euro 5-pin 150 mm (6 in) PVC Pigtail Connector
Modified for Automotive; See Literature Insert -
PVD100Q W/6IN
PVD Series: Parts Verification
100 mm 4 channel; Range; up to 2 m,
Input:12-30 V dc
Outputs: Selectable NPN/PNP
5-pin 150 mm Quick-Disconnect Pigtail -
PVD100MA1Q W/6IN
PVD Series: Parts Verification
100 mm 4 channel; Range; up to 2 m,
Input:12-30 V dc
Outputs: Selectable NPN/PNP
Euro 5-pin 150 mm (6 in) PVC Pigtail Connector
Modified for Automotive; See Literature Insert -
PVD225Q W/6IN
PVD Series: Parts Verification
225 mm 8 channel; Range; up to 2 m,
Input:12-30 V dc
Outputs: Selectable NPN/PNP
5-pin 150 mm Quick-Disconnect Pigtail -
PVD100 W/30
PVD Series: Parts Verification
100 mm 4 channel; Range; up to 2 m,
Input:12-30 V dc
Outputs: Selectable NPN/PNP
9 m (30 ft) Cable -
PVD225QPMA29
PVD Series: Parts Verification
225 mm 8 channel; Range; up to 2 m,
Input:12-30 V dc
Outputs: Selectable NPN/PNP
Euro 5-pin 2 m (6.5 ft) PUR Pigtail Connector
Modified for Automotive; See Literature Insert -
PVD100BQ
PVD Series: Parts Verification
100 mm 4 channel; Range; up to 2 m,
Input:12-30 V dc
Outputs: Selectable NPN/PNP
Euro 5-pin 2 m (6.5 ft) PVC Pigtail Connector
B Frequency -
PVD100QMA15
PVD Series: Parts Verification
100 mm 4 beams; Retroreflective Range; up to 2 m, Diffuse; up to 400 mm
Input:12-30 V dc
Outputs: Selectable NPN/PNP
Euro 5-pin 2 m (78.7 in) PVC Pigtail Connector -
PVD100QNA
PVD Series: Parts Verification
100 mm 4 channel; Range; up to 2 m,
Input:12-30 V dc
Outputs: Selectable NPN/PNP
Euro 5-pin 150 mm (6 in) PVC Pigtail Connector
Custom Settings; See Literature Insert -
PVD100QPMA15
PVD Series: Parts Verification
100 mm 4 beams; Retroreflective Range; up to 2 m, Diffuse; up to 400 mm
Input:12-30V dc
Selectable NPN/PNP
Euro 5-pin 150 mm (6 in) PUR Pigtail -
PVD100QPMA29
PVD Series: Parts Verification
100 mm 4 channel; Range; up to 2 m,
Input:12-30 V dc
Outputs: Selectable NPN/PNP
Euro 5-pin 2 m (6.5 ft) PUR Pigtail Connector
Modified for Automotive; See Literature Insert -
PVD225QMA15
PVD Series: Parts Verification
225 mm 8 beams; Retroreflective Range
up to 2 m; Diffuse; up to 400 mm
Input:12-30 V dc
Outputs: Selectable NPN/PNP
Euro 5-pin 2 m (78.7 in) PVC Pigtail Connector -
PVD225QNA
PVD Series: Parts Verification
225 mm 8 channel; Range; up to 2 m,
Input:12-30 V dc
Outputs: Selectable NPN/PNP
Euro 5-pin 150 mm (6 in) PVC Pigtail Connector
Modified for Automotive; See Literature Insert -
PVD225QPMA19
PVD Series: Parts Verification
225 mm 8 beams; Retroreflective Range; up to 2M, Diffuse; up to 400 mm
Input:12-30 V dc
Outputs: Selectable NPN/PNP