• Retour

    • Reading DPM Codes on Automotive Components

    2D codes etched into automotive components are verified at multiple points during vehicle assembly. The codes are small and complex and can be hard to distinguish from the material they are etched into. Read on to learn how the ABR 7000 barcode reader reliably decodes low-contrast DPM codes. 

    ABR 7000 reads 2D barcodes etched into automotive components image
    Application: Reading DPM (Direct Part Mark) Codes

    To ensure that vehicle components can easily be traced throughout their entire life cycle, Data Matrix and other 2D codes are permanently etched into the surface of each component. The codes are small, complex, and dense with information specific to the component. Contrast levels between the codes and the material they have been etched into are low and scratches, surface imperfections, and reflectivity can make the codes difficult to read.

    To ensure that each component is genuine original and matches the build order, the code must be verified prior to being installed in a vehicle. If a code cannot be verified, the component cannot be used in the vehicle and must be removed from the line.

    Solution: High-Resolution Barcode Reader with DPM Lighting

    Deployed along the assembly line, an ABR 7000 barcode reader with multicolored LED lights integrated into the device verifies the code on each component entering the inspection area. The ABR 7000 combines superior decoding capabilities with a high-resolution imager and is housed in a compact, IP67-rated metal enclosure.

    Using Barcode Manager software, the ABR 7000 can be configured for bright-field or dark-field illumination. Dark-field illumination is better suited for applications like this where the DPM code has been laser etched onto a reflective surface. This lighting configuration utilizes the blue LED lights built into the barcode reader to make the code appear much darker than the surrounding area. 

    The enhanced contrast between the code and the surface of the component allows the ABR 7000 to capture a detailed image of the inspection area with every aspect of the datamatrix code well defined. The information contained in the code is then verified and sent over an Ethernet connection to the factory management system which logs the data.

    Benefits of ABR 7000 Barcode Readers

    Superior Decoding of Challenging Barcodes

    ABR 7000 barcode readers utilize advanced algorithms to decode a full library of 1D and 2D barcodes. Models with a 1.3 MP (1280 x 1024 pixels) imager reliably capture fine details on small, complex, and challenging barcodes. Models with a 2 MP (1600 x 1200 pixels) imager offer increased resolution to read smaller codes over a larger target area and at greater distances.

    Integrated Multicolor Lighting for DPM Applications

    The ABR 7000 is available in models featuring integrated red or multicolor LED lights. Multicolor models can be configured for bright field or dark field illumination. Bright-field lighting is best for illuminating DPM codes on flat surfaces with machining flaws while dark-field illumination is best improving contrast in applications where the code has been laser etched or dot peened into a flat, reflective surface.

    Easy Installation in Industrial Environments

    The ABR 7000 is protected from hazards common to industrial environments by a rugged, IP67-rated metal housing. It has an all-in-one design that combines imager, lens, and LED lighting in one compact device and features a rotating connector that simplifies installation in difficult and space constrained deployments.

    Intuitive Software with Advanced Capabilities

    Connect, configure, and monitor multiple ABR Series devices using Barcode Manager. This free and easy-to-use software features flowchart programming that makes it easy to setup inspections and access advanced capabilities. 

    Image - ABR 7000 avec LED bleues
    Blue lights integrated into the the ABR 7000 barcode reader create a dark field lighting pattern, ideal for illuminating DPM codes on flat, highly reflective surfaces.
    Featured Products
    Lecteurs de codes-barres série ABR
    Lecteurs de codes-barres série ABR

    Compacts, autonomes et dotés d'options d'éclairage avancées, les lecteurs de codes-barres série ABR lisent avec précision les codes-barres 1D et 2D les plus complexes.

    Read More
    Logiciel Barcode Manager pour ABR
    Barcode Manager pour ABR

    Le logiciel Barcode Manager pour lecteurs de codes-barres série ABR propose une programmation intuitive à l'aide de diagrammes qui facilite la mise en place d'inspections et l'accès à des fonctionnalités avancées permettant de résoudre les applications de lecture de codes-barres les plus complexes.

    Read More
    Download the White Paper
    Find a Distributor
    Imprimer
    Ajouter à ma bibliothèque
    Ajouté