Bouton d'arrêt d'urgence en montage à plat
Flush mount base enables easy installation and hookup with no assembly, individual wiring, or additional enclosure required.
- Models available with In-Series Diagnostics (ISD), which provides detailed status and performance data from each connected button that can be accessed with an HMI or similar device
- Patented E-stop base will flash red when actuated and indicate armed status with either green, yellow, or no illumination
- One-piece, fully enclosed button with M12 connection reduces time and labor of installation
- Rugged design rated to IP65 for use in harsh environments
- Models available with local reset input
- Button diameter, button shroud, actuation release type, illumination, and lockable options available
- Latching design complies with ISO 13850 per IEC 60947-5-1
- Safe Break Action ensures NC contacts will open if the contact block is separated from the actuator
Faciles à installer, les boutons d'arrêt d'urgence en montage à plat sont disponibles en quatre versions : arrêt d'urgence standard avec ou sans embase lumineuse et verrouillage possible suivant modèle.
- Disponible en deux couleurs (jaune/vert et rouge), en une couleur (rouge) ou avec une embase noire non illuminée
- Conception robuste de classe IP65
- Disponible dans une version compatible avec la passerelle BUS de sécurité lumineuse
- Conception du verrouillage conforme à la norme ISO 13850 et manœuvre positive d'ouverture (directe) conforme à la norme CEI 60947-5-1
- L'ouverture sécurisée garantit l'ouverture des contacts NF si le bloc de contacts est séparé de l'actionneur
- Possibilité d'interfacer et de relier en série plusieurs boutons à l'aide de câbles de branchement de la série CSS
- Conformité aux exigences des normes ANSI B11.19, ANSI NFPA79 et CEI/EN 60204-1 relatives aux arrêts d'urgence
Downloads
Littérature technique
Littérature Marketing
Our most commonly requested models are available below. For all other configurations, contact a Banner sales representative. Minimum order quantities may apply.
-
SSA-EB1PLGR-12ED1Q8
Emergency Stop: Flush Mounting 40 mm Push Button
Environ. Rating: IP65; Lighted; Color: Green, Red Solid/Flashing
2 N.C. Safety Contacts; 1 N.O. aux. Contacts
8-pin M12 QD -
SSA-EB1PLXR-12ED1Q8
Emergency Stop: Flush Mount 40 mm Push Button
Environ. Rating: IP65; Lighted; Color: Red Solid/Flashing
2 N.C. Safety Contacts; 1 N.O. aux. Contacts
8-pin M12 QD -
SSA-EB1PL2-12ED1Q8
SSA-EB1 Flush-mount Emergency Stop Push Button
Illuminated (PUSH ON) 40 mm Actuator
IP65; Contacts: 2NC/1 NO; 8-pin M12 QD -
SSA-EB1P-02ED1Q4
SSA-EB1 Flush-mount Emergency Stop Push Button
40 mm Actuator
IP65; Contacts: 2NC; 4-pin M12 QD -
SSA-EB1PLYR-12ED1Q8
Emergency Stop: Flush Mounting 40 mm Push Button
Environ. Rating: IP65; Lighted; Color: Yellow, Red Solid/Flashing
2 N.C. Safety Contacts; 1 N.O. aux. Contacts
8-pin M12 QD -
SSA-EB1PLGR-0DED1Q8
Emergency Stop with ISD: Flush Mount 40 mm Push Button
Illuminated Color: Green/Red Flashing
2 N.C. OSSD Safety Contacts, IP65
8-pin M12 QD -
SSA-EB1MLGRP-12ED1Q8
Emergency Stop: Flush Mounting 44 mm Lockable Push Button
Environ. Rating: IP65; Lighted; Color: Green, Red Solid/Flashing
2 N.C. Safety Contacts; 1 N.O. aux. Contacts
8-pin M12 QD -
SSA-EB1PL-12ED1Q8
Emergency Stop: Flush Mounting 40 mm Push Button
Environ. Rating: IP65; Lighted; Color: Red Solid
2 N.C. Safety Contacts; 1 N.O. aux. Contacts
8-pin M12 QD -
SSA-EB1PLXR-0DED1Q8
Emergency Stop with ISD: Flush Mount 40 mm Push Button
Illuminated Color: Off/Red Flashing
2 N.C. OSSD Safety Contacts, IP65
8-pin M12 QD -
SSA-EB1P-02ED1Q5A
SSA-EB1 Flush-mount Emergency Stop Push Button
40 mm Actuator
IP65; Contacts: 2NC; 5-pin M12 QD
Safety BUS Node Compatible CH1=pins1&2 CH2=pins4&5 -
SSA-EB1P-02ED1Q5B
SSA-EB1 Flush-mount Emergency Stop Push Button
40 mm Actuator
IP65; Contacts: 2NC; 5-pin M12 Integral QD
Safety BUS Node Compatible CH1=pins1&4 CH2=pins2&5 -
SSA-EB1PL-02ED1Q5B
Emergency Stop: Flush Mounting 40 mm Push Button
Environ. Rating: IP65; Lighted; Color: Red Solid
2 N.C. Safety Contacts; Siemens ET200Pro
5-pin M12 QD -
SSA-EB1MP-02ED1Q5B
SSA-EB1 Flush-mount Emergency Stop Push Button
Lockable 44 mm Actuator
IP65; Contacts: 2NC; 5-pin M12 Integral QD
Safety BUS Node Compatible CH1=pins1&4 CH2=pins2&5 -
SSA-EB1PL2-12EB1Q12K50
Illuminated E-Stop Button (Push On): 2 NC/1 NO
E-Stop Legend
3 Color K50 Touch, BENC Enclosure
12-pin M12 Integral QD -
SSA-EB2P-02ED1Q5B
SSA-EB1 Flush-mount Emergency Stop Push Button
60 mm Actuator
IP65; Contacts: 2NC; 5-pin M12 QD
Safety BUS Node Compatible CH1=pins1&4 CH2=pins2&5 -
SSA-EB1P-22ED1Q8
SSA-EB1 Flush-mount Emergency Stop Push Button
40 mm Actuator
IP65; Contacts: 2NC/2NO; 8-pin M12 Integral QD -
SSA-EB1PLXR-02ED1Q5A
Emergency Stop: Flush Mounting 40 mm Push Button
Environ. Rating: IP65; Lighted; Color: Red Flashing
2 N.C. Safety Contacts ; AB ArmorBlock
5-pin M12 QD -
SSA-EB1PLXRS1-12ED1Q8
Emergency Stop: Flush Mount 40 mm Push Button
Environ. Rating: IP65; Lighted; Color: Red Solid/Flashing
2 N.C. Safety Contacts; 1 N.O. aux. Contacts
8-pin M12 QD
ESC-1-YW Button Shroud Installed -
SSA-EB1PLGR-12ED1
Emergency Stop: Flush Mounting 40 mm Push Button
Environ. Rating: IP65; Lighted; Color: Green, Red Solid/Flashing
2 N.C. Safety Contacts; 1 N.O. Aux. Contacts
Terminal Strip -
SSA-EB1PLGRS1-0DED1Q8
Emergency Stop with ISD: Flush Mount 40 mm Push Button
Illuminated Color: Green/Red Flashing
2 N.C. OSSD Safety Contacts, IP65
8-pin M12 QD
ESC-1-YW Button Shroud Installed -
SSA-EB1ML2P-12ED1Q8
SSA-EB1 Flush-mount Emergency Stop Push Button
Lockable Illuminated (PUSH ON) 44 mm Actuator
IP65; Contacts: 2NC/1 NO; 8-pin M12 Integral QD -
SSA-EB1PLYR-12ED1
Emergency Stop: Flush Mounting 40 mm Push Button
Environ. Rating: IP65; Lighted; Color: Yellow, Red Solid/Flashing
2 N.C. Safety Contacts; 1 N.O. aux. Contacts
SPRF 23331 -
SSA-EB1MLYRP-12ED1Q8
Emergency Stop: Flush Mounting 44 mm Lockable Push Button
Environ. Rating: IP65; Lighted; Color: Yellow, Red Solid/Flashing
2 N.C. Safety Contacts; 1 N.O. aux. Contacts
8-pin M12 QD -
SSA-EB1MP-02ED1Q4
SSA-EB1 Flush-mount Emergency Stop Push Button
Lockable 44 mm Actuator
IP65; Contacts: 2NC; 4-pin M12 Integral QD -
SSA-EB1PL2S1-12ED1Q8
SSA-EB1 Flush-mount Emergency Stop Push Button
Illuminated (PUSH ON) 40 mm Actuator
IP65; Contacts: 2NC/1 NO; 8-pin M12 QD with shroud style 1 installed -
SSA-EB1PLGR-0DED1Q8R
Emergency Stop with ISD: Flush Mount 40 mm Push Button
Illuminated Color: Green/Red Flashing
2 N.C. OSSD Safety Contacts, IP65
8-pin M12 QD
Local Reset Input -
SSA-EB1MP-22ED1Q8
SSA-EB1 Flush-mount Emergency Stop Push Button
Lockable 44 mm Actuator
IP65; Contacts: 2NC/2NO; 8-pin M12 Integral QD -
SSA-EB1PL-02ED1Q5A
Emergency Stop: Flush Mount 40 mm Push Button
Environ. Rating: IP65; Lighted; Color: Red Solid
2 N.C. Safety Contacts; AB ArmorBlock
5-pin M12 QD -
SSA-EB1PL2-12EB1Q12K50LT
Illuminated E-Stop Button (Push On): 2 NC/1 NO
E-Stop Legend
3 Color K50 Touch, BENC Enclosure
12-pin M12 Integral QD Left Cable -
SSA-EB1PLS1-12ED1Q8
Emergency Stop: Flush Mounting 40 mm Push Button
Environ. Rating: IP65; Lighted; Color: Red Solid
2 N.C. Safety Contacts; 1 N.O. aux. Contacts
8-pin M12 QD
ESC-1-YW Button Shroud Installed -
SSA-EB1PLXR-02ED1Q5B
Emergency Stop: Flush Mounting 40 mm Push Button
Environ. Rating: IP65; Lighted; Color: Red Flashing
2 N.C. Safety Contacts; Siemens ET200Pro
5-pin M12 QD -
SSA-EB2PLXR-12ED1Q8
Emergency Stop: Flush Mount 60 mm Push Button
Environ. Rating: IP65; Lighted; Color: Red Solid/Flashing
2 N.C. Safety Contacts; 1 N.O. aux.
8-pin M12 QD -
SSA-EB1MLP-12ED1Q8
Emergency Stop: Flush Mounting 44 mm Lockable Push Button
Environ. Rating: IP65; Lighted; Color: Red Solid
2 N.C. Safety Contacts; 1 N.O. aux. Contacts
8-pin M12 QD -
SSA-EB1MLXRP-12ED1Q8
Emergency Stop: Flush Mount 44 mm Lockable Push Button
Environ. Rating: IP65; Lighted; Color: Red Solid/Flashing
2 N.C. Safety Contacts; 1 N.O. aux. Contacts
8-pin M12 QD -
SSA-EB1MP-02ED1
SSA-EB1 Flush-mount Emergency Stop Push Button
Lockable 44 mm Actuator
IP65; Contacts: 2NC; Cable Gland 1/2-14NPT -
SSA-EB1P-02ED1Q4A
SSA-EB1 Flush-mount Emergency Stop Push Button
40 mm Actuator
IP65; Contacts: 2NC; 4-pin M12 Integral QD
CH1=pins1&3 CH2=pins2&4 -
SSA-EB1P-11ED1Q4
SSA-EB1 Flush-mount Emergency Stop Push Button
40 mm Actuator
IP65; Contacts: 1NC/1 NO; 4-pin M12 QD -
SSA-EB1PL-12ED1
Emergency Stop: Flush Mounting 40 mm Push Button
Environmental Rating: IP65; Lighted; Color: Red Solid
2 N.C. Safety Contacts; 1 N.O. Aux. Contacts
Terminal Strip -
SSA-EB1PLGR-02ED1Q5A
Emergency Stop: Flush Mounting 40 mm Push Button
Environ. Rating: IP65; Lighted; Color: Green, Red Flashing
2 N.C. Safety Contacts; AB ArmorBlock
5-pin M12 QD -
SSA-EB1PLGRS1-02ED1Q5A
Emergency Stop: Flush Mounting 40 mm Push Button
Environ. Rating: IP65; Lighted; Color: Green, Red Flashing
2 N.C. Safety Contacts; AB ArmorBlock
5-pin M12 QD
ESC-1-YW Button Shroud Installed -
SSA-EB1PLYR-0DED1Q8
Emergency Stop with ISD: Flush Mount 40 mm Push Button
Illuminated Color: Yellow/Red Flashing
2 N.C. OSSD Safety Contacts, IP65
8-pin M12 QD -
SSA-EB2P-04ED1Q8
SSA-EB2 Flush-mount Emergency Stop Push Button
60 mm Actuator
IP65; Contacts: 4NC; 8-pin M12 Integral QD -
SSA-EB1MLYRP-02ED1Q5A-SP
SSA-EB1 Flush-mount Emergency Stop Push Button
Yellow, Red Flash Illuminated Base; Lockable 44 mm Actuator
IP65; 2 N.C. Safety Contacts; 1 N.O. aux. Contact; 5-pin M12 Integral QD
Safety BUS Node Compatible CH1=pins1&2 CH2=pins4&5 -
SSA-EB1MP-02ED1Q5A
SSA-EB1 Flush-mount Emergency Stop Push Button
Lockable 44 mm Actuator
IP65; Contacts: 2NC; 5-pin M12 Integral QD
Safety BUS Node Compatible CH1=pins1&2 CH2=pins4&5 -
SSA-EB1MP-11ED1Q4
SSA-EB1 Flush-mount Emergency Stop Push Button
Lockable 44 mm Actuator
IP65; Contacts: 1NC/1 NO; 5-pin M12 Integral QD -
SSA-EB1PLGR-02ED1Q5B
Emergency Stop: Flush Mounting 40 mm Push Button
Environ. Rating: IP65; Lighted; Color: Green, Red Flashing
2 N.C. Safety Contacts; Siemens ET200Pro
5-pin M12 QD -
SSA-EB1PLXR-0DED1Q8R
Emergency Stop with ISD: Flush Mount 40 mm Push Button
Illuminated Color: Off/Red Flashing
2 N.C. OSSD Safety Contacts, IP65
8-pin M12 QD
Local Reset Input -
SSA-EB1PLYR-02ED1Q5A
Emergency Stop: Flush Mounting 40 mm Push Button
Environ. Rating: IP65; Lighted; Color: Yellow, Red Flashing
2 N.C. Safety Contacts; AB ArmorBlock
5-pin M12 QD -
SSA-EB1PLYR-02ED1Q5B
Emergency Stop: Flush Mounting 40 mm Push Button
Environ. Rating: IP65; Lighted; Color: Yellow, Red Flashing
2 N.C. Safety Contacts; Siemens ET200Pro
5-pin M12 QD -
SSA-EB1PLYR-0DED1Q8R
Emergency Stop with ISD: Flush Mount 40 mm Push Button
Illuminated Color: Yellow/Red Flashing
2 N.C. OSSD Safety Contacts, IP65
8-pin M12 QD
Local Reset Input