| Sensing Range | 1.5 m (59")
|
| Sensing Beam | 880 nm Invisible IR beam
|
| Supply Voltage | 10 to 30 V dc; less than 15 mA exclusive of load
|
| Supply Protection Circuitry | Protected against reverse polarity and transient over voltages
|
| Delay at Power-up | Less than 1 second
|
| Output Configuration | One solid state output, NPN (sinking) or PNP (sourcing), depending on model
|
| Output Rating | 100 mA
OFF-state leakage current:< 10 μA
ON-state saturation voltage:< 0.2V @ 10 mA; < 0.6V @ 100 mA;
|
| Output Protection Circuitry | Protected against output short circuit, continuous overload and transient over voltages
|
| Output Response Time | 2.5 ms ON, 1.75 ms OFF
|
| Repeatability | 350 μs
|
| Switching Frequency | 235 Hz
|
| Indicators | Green Power LED (emitter and receiver):ON indicates power on;Flashing indicates output short circuited (receiver only)
Amber Output LED (receiver only):ON indicates light sensed; Flashing indicates marginal excess gain (1.0 to 1.5x excess gain)
|
| Construction | PVC-jacketed cable
Housing:ABS
Lens:Polycarbonate; epoxy encapsulant
|
| Environmental Rating | IP65
|
| Connections | 2 m (6.5') cable or 150 mm (6")
|
| Operating Conditions | Temperature:–20º to +50º C (–4º to 122º F)
|