| Supply Voltage and Current | 10 to 30V dc (10% max. ripple) @ less than 35 mA
|
| Range | Range varies; depending on which receiver is used
|
| Supply Protection Circuitry | Protected against reverse polarity
|
| Delay at Power-up | 1.5 seconds
|
| Sensing Beam | 650 nm visible red Class 1 laser (temperature coefficient 0.2 nm/°C)
|
| Beam Diameter at Aperture | 2.5 mm collimated ellipse
|
| Beam Divergence | ±0.5 milliradians typical
|
| Laser Control | Enable beam by applying 0V dc or by opening circuit; apply +10 to 30V dc to black wire to inhibit beam
|
| Indicators | Green indicator, visible through rear cover, indicates power applied
|
| Construction | M18 x 1 threaded yellow PBT polyester barrel housing. Acrylic lens. Electronics totally encapsulated. Two mounting nuts are included.
|
| Environmental Rating | NEMA 6P; IEC IP67
|
| Connections | PVC-jacketed 2 m or 9 m attached cable, or 4-pin Euro-style quick-disconnect fitting. QD cables are ordered separately.
|
| Operating Conditions | Temperature:-40° to +50° C
Relative humidity:90% @ 50° C (non-condensing)
|
| Laser Classification | Class 1 laser product complies with 21 CFR 1040.10, EN60825-1:2001, except for deviations pursuant to
Laser Notice 50, dated 7-26-01.
|