U-GAGE T30U—Pump/Level Control
Overview
- Provides 12 to 24V dc supply voltage with two NPN or PNP outputs, depending on models
- Offers dual-discrete outputs for setting independent near/far limits or a setpoint centered in the window, for either or both outputs
- Includes switching logic for fill-level control and web tensioning control
- Features independently programmable outputs
- Housed in T-style right-angle housing with 30 mm threaded nose
- Available with range of 150 mm to 1 m with a 48 millisecond response time, or 300 mm to 2 m with a 96 millisecond response time
- Available in chemically resistant models with a Teflon coating to protect the transducer
- Simplifies setup with push-button and remote TEACH-mode programming
Product Specifications
| Supply Voltage and Current | 12 to 24V dc (10% max. ripple) @ 90 mA (exclusive of load) |
|---|---|
| Range | “A” suffix models: Near limit:150 mm min.
Far limit:1 m max.
“B” suffix models:Near limit:300 mm min.
Far limit:2 m max.
“-CRFV” suffix models:Near limit:300 mm min.
Far limit:1.5 m max.
|
| Supply Protection Circuitry | Protected against reverse polarity and transient voltages |
| Output Configuration | SPST solid-state switch conducts when target is sensed within sensing window; choose NPN (current sinking) or PNP (current sourcing) models |
| Output Rating | 100 mA max. per sensor
OFF-state leakage current:less than 10 µA ON-state saturation voltage:less than 1V @ 10 mA; less than 1.5V @ 100 mA |
| Output Protection | Protected against false pulse on power-up and continuous overload or short-circuit of outputs |
| Output Response Time | “A” suffix models:48 milliseconds “B” suffix models:96 millliseconds |
| Sensing Performance | Specified using a 10 x 10 cm aluminum target @ 25° C under fixed sensing conditions.
Repeatability:±0.25% of measured distance Minimum window size:10 mm Hysteresis:2.5 mm |
| Adjustment | Sensing window limits:TEACH-mode programming of near and far window limits may be set using membrane push buttons on sensor or remotely using TEACH input. Window limits may be programmed separately or together. |
| Indicators | 4 LED indicators: In RUN mode: Green ON steady:power ON, RUN mode
Green flashing:output overloaded
Red flashing:relative received signal strength
Yellow ON steady:output conducting
In PROGRAM mode:Green OFF:PROGRAM mode
Red flashing:relative received signal strength
Yellow ON steady:ready for first window limit
Yellow flashing:ready for second window limit
Yellow OFF:not teaching this output
|
| Construction | Molded reinforced thermoplastic polyester housing |
| Environmental Rating | Leakproof design is rated IEC IP67; NEMA 6P |
| Connections | 5-conductor 2 m or 9 m shielded PVC-jacketed attached cable, or 5-pin Euro-style quick-disconnect fitting. QD cables are ordered separately. |
| Operating Conditions | Temperature:-20° to +70° C Relative humidity:100% |
| Vibration and Mechanical Shock | All models meet Mil. Std. 202F requirements. Method 201A (Vibration: 10 to 60 Hz max. double amplitude 0.06”, maximum acceleration 10G). Also meets IEC 947-5-2 requirements: 30G, 11 milliseconds duration, half-sine wave. |
| Application Note | Objects passing inside the specified near limit will produce a false response. |
Sign up for eNews
Industry solutions, application tips, new products, quick video tutorials, trends.
Subscribe Now »Worldwide Distributors
Banner has more than 2,000 distributors worldwide - ready to help you.
Find international distributors