• Atrás

    • Safely Start and Stop Machines

    SSA-EB1P--Illuminated---Application

    Safety and Indication for Machine Start/Stop

    Operators must be able to safely start machine processes as well as safely stop them in an emergency using a variety of safety-rated devices including emergency stop buttons, rope pulls, and two hand control devices.  

    Banner Engineering combines ergonomic safety-rated devices with LED indication for a more intuitive user experience and at-a-glance visual management of your safety systems.  Keep reading to learn about the different types of safe operator interfaces. 

    Overview
    Use Cases
    Products
    Introduction to Safe Operator Interfaces
    os80-on-welding-cell
    What are Safe Operator Interfaces?

    Emergency stop buttons (or e-stops) and rope pulls ensure safe stops in emergencies.  E-stops are mechanical buttons that must be pressed with force to actuate.  Pressing an e-stop, or pulling the rope on a rope pull, will immediately stop hazardous motion of the machine.  

    Two hand controls are devices that initiate machine processes, for example when operating a mechanical power press.  The operator must have one hand on each control before the machine will safely start, and the machine will continue operation only as long as both hand controls are actuated.  This ensures that the operator's hands are away from the point of operation during the entire time the machine is moving.  

    Please note: The information on this page is meant for educational purposes only and is accurate as of the time of publication. Always consult a safety expert about your specific application before implementing any machine safety measures.

    3 Ways to Safely Start and/or Stop Machinery
    ssa-eb1p_prod-app
    Emergency Stop Buttons

    Illuminated Base Quickly Identifies Pressed Button

    With traditional e-stops, it can be time-consuming to determine exactly which button was pressed, and typically an emergency stop condition requires a reset of all e-stop buttons on a line.  To solve this challenge, illuminated e-stops have an LED base that can be configured to change from yellow to flashing red when pushed. The colored lights n the e-stop base provide easy visual indication of armed button, pushed button, or system status.

    This makes it easy to quickly see the status of all estops at a glance and instantly identify an actuated button. The faster the response to the stop condition, the more quickly the machine can be restarted, reducing unplanned downtime.  lluminated e-stops can also reduce commissioning time and costs due to the ability to series connect the e-stops to a safety controller. This not only reduces cable costs and wiring time, but also reduces the number of inputs used at the safety controller.

    Rope Pulls and Domed Indicators

    Quickly Identify Pull Rope with LED Indicator

    Rope pull switches run along the length of a conveyor so the operator can grab and pull it from anywhere to immediately stop the conveyor. When the rope is pulled, it can often be difficult to locate the safety device in need of reset. To help the operation to return to normal quickly, a LED domed indicator can be mounted to the housing of rope pull switches for fast identification of the unit that was activated.

    Spans of rope range from 6 m to 100 m, providing the flexibility to safeguard long or short conveyors.  Rope pull switches from Banner are also made with heavy-duty thermoplastic housing for use in demanding industrial settings.

    rp_lS42f_le_rope_pull_depalletizer_bev_line_a
    runbar_prod-app
    Two Hand Control Run Bar

    Start, Stop, and Indication Functions in One Ergonomic Solution

    A run bar combines two hand control devices, e-stops, and indicators into a convenient ergonomic solution for operating machinery.  The two-hand control system makes the operator a “hostage” while the hazard is present, preventing the operator from putting their hands in the way of the hazard.

    Two hand control actuators must be located in a way that hazardous motion is completed or stopped before the operator can release one or both of the buttons and reach the hazard. 

    Featured Products
    E-Stop_No_Cover_Red
    Illuminated Emergency Stop Button

    Ergonomic Design, Intuitive Visual Management

    La base de montaje patentada de 30 mm permite una fácil instalación y conexión sin necesidad de ensambles, cableados individuales o la necesidad de un gabinete adicional.

    • Reduce los costos de mano de obra intensiva con un botón de Paro de Emergencia totalmente cerrado listo para la instalación
    • Varios botones pueden conectarse en serie, con una lógica integrada que emite una clara indicación del botón que está presionado
    • El diseño de enclavamiento cumple con lo estipulado en el ISO 13850 acerca de la apertura positiva según el IEC 60947-5-1
    • Diseño resistente clasificado IP65
    Rope Pulls

    Emergency Stop for Conveyors & Large Machines

    Interruptores mecánicos de abertura positiva conectados por cables, que colocan a corto alcance a los interruptores de corte de emergencia para ganar tiempo crucial en casos de emergencia.

    • Disponibles en rangos que van desde 6 hasta 100 m
    • Modelos de interruptor de disparo y seguro están disponibles
    • La duración de vida mínima del interruptor es de 1 millón de operaciones
    • Las carcasas para interruptores resistentes soportan entornos agresivos
    • El interruptor se activa si la cuerda se tira, se suelta o se rompe
    • El diseño cumple con los requisitos de apertura positiva para los interruptores de tracción de cables
    RP-RM83-75LT_Pair
    STB_button
    Two Hand Control

    An Ergonomic Solution for Machine Start/Stop

    Solución ergonómica y robusta para el accionamiento de control de dos manos y la protección cuando se interconecta con módulos DUO-TOUCH SG de control bi manual. 

    • Proporciona un medio cómodo y económico para el accionamiento de control de dos manos cuando se conecta con módulos DUO-TOUCH SG de control bi manual o sistemas de control comparables
    • Ofrece un diseño ergonómico para reducir tensión de brazo, muñeca y mano
    • Ofrece modelos con paro de emergencia
    • Brillante indicador LED que muestra el estado de encendido, salida y error en los STB
    • Cumple con ANSI B11.19 e ISO 13851 (EN574)

     

    Resources
    Añadir a Mi Biblioteca
    Añadido