SGS - Safety Grid System [Video]
SGS Safety Grid Systems are cost-effective multiple beam safety light devices for access and long-range perimeter guarding applications.
Learn More About the SGS Safety Grid System
Introducing the new SGS Safety Grid System by Banner Engineering.
Banner’s SGS Safety Grid System has a heavy-duty aluminum housing and provides a low-cost perimeter guarding solution for tough environments.
Installation is made simple with on-board alignment lamp and indicators.
Emitter/Receiver models are available as well as Active/Passive models for reduced wiring and cost.
With a range of up to 60 meters, and 2, 3 and 4 beam heights to choose from, Banner’s new Safety Grid System can be used in a wide range of perimeter guarding applications.
Additionally, for end of line packaging applications Banner offers SGS models with integral muting. These models can be paired with SGS mute arm kits for a turn-key solution.
The pre-assembled mute arm kits have multiple configurations and simply plug-n-play connect directly to the SGS Safety Grid.
Material can pass through in mute mode without stopping operations and protects from entry when not muted.
SGS Safety Grid System from Banner Engineering.
Aprenda cómo añadir dispositivos, bloques de función y la lógica para completar su aplicación. Este video tutorial del software se entiende como una herramienta de referencia solamente. Fue creado como una guía para ayudar al usuario con los pasos generales realizados durante el proceso de instalación. Es importante que lea y siga el Manual de seguridad incluido en el software antes de instalación.
This tutorial will review multipage navigation, a helpful tool for growing safety I/O numbers and when using multiple safety zones and functions. This software tutorial video is meant as a reference tool only. It was created as a guide to help you through the general steps involved during the installation process. It is important that you read and follow the Safety Manual included in the software prior to installation.