物料搬運：工作站

工業工作站

工業工作站是執行訂單履行相關工作（訂單、包裝、運輸和其他人工工作）不可或缺的一部分。由於操作人員在一次輪班期間處理數千個訂單，在這些高速運作中，出錯的可能性非常大。

Banner提供一系列產品和解決方案，可以大幅提高工業工作站的效率、準確性和產出。Banner 拾取燈產品引導操作人員完成套件包裝、增加產量並提高準確性。我們的LED工作燈為工作站提供明亮、免維修的照明，強化員工的工作效率和經驗。來自Banner的指示燈讓操作人員在不離開工作站或不停止生產的情況下，提供高度可見的狀態更新，或進行零件呼叫。Banner 無線產品讓工作站無需重新連接固定通信電纜，即可快速重新調整，提高工廠的工作站彈性。

+全部展開 | —全部收起

產品應用

條碼讀取

ABR Series barcode readers can be used to solve track and trace applications, offering increased resolution to read smaller codes, over a larger target area, and at greater distances. Polarization is now available in both 1.3 MP and 2 MP ABR 7000 models for improved performance on targets with reflective surfaces or where glare is present. Our highest resolution camera, the VE is also available in only-barcode reading models, as well as the original vision camera-only model. This makes our VE series is the highest-resolution barcode reader in our portfolio, designed to better solve complex applications.

了解更多

用於工作站的高品質 LED 工作燈

Banner’s WLB32 Industrial Light Bar is ideal for workstations. With a Hi/Lo/Off switch, operators are able to control the lighting level and are able to switch the LED light bar off when they are done. The WLB32 provides workers high brightness with even light output and enables numerous tasks in a workstation, including working on a computer.

了解更多

拾取指示燈解決方案

Several technologies and solutions are available for bin-picking applications for error-proofing processes. Light arrays prompt the operator for part selection with integral job lights, then reliably sense retrieval of the part, using an array of visible red or infrared sensing beams located in front of the bin.

了解更多

大型料箱的零件拾取檢驗

為了降低組裝操作中的錯誤風險，一體式EZ-LIGHT PVD拾取燈感測器放置於貨架頂上的橫桿上，由上往下檢測架子開口處。PVD與附有製程控制器的介面相連接，控制器的編寫程式則會讓待拾取零件的箱上PVD發出指示燈光。在PVD檢測到裝配人員的手伸進然後再離開箱子後，控制器就會發出訊號，讓下一個排隊等待拾取零件的料箱指示燈發光。

了解更多

為履行訂單而進行的箱子拾取

在書籍包裝倉庫中，每個紙箱上方的貨架配有一體式EZ-LIGHT PVD拾取燈感測器。工人透過挑選裝箱單上指定的每類書的數量來取料以滿足ˋ訂單。為了使工人更容易找到從中挑選書籍的紙箱，這些紙箱上面特定的PVD會被點亮。PVD偵測工人的手位於紙箱中，以驗證書籍已經拾取。

了解更多

小箱子的零件拾取指示

To reduce the risk of error in an assembly operation, a one-piece EZ-LIGHT PVD pick-to-light sensor with a 400 mm range is interfaced with a process controller programmed with the correct assembly sequence. The controller makes the PVDs light up in the correct order, to show the assembler which part to pick. After the PVD detects that the assembler's hand has entered and left the bin, the controller signals the PVD of the next bin in the pick sequence to light up.

了解更多

特色產品

WLB32 Adjustable LED Workstation Light

Bright, glare-free workstation light with adjustable brightness improves productivity. Cascadable models for continuous lighting with minimal wiring.

WLB92系列：92mm工業級LED直線型工作燈

WLB92是一款超亮的LED燈具，具有均勻的照明光線，可提供明亮的工作照明，提高生產力。

90mm圓頂型指示燈：K90系列

90 mm大型指示燈可從各角度方向和更長距離提供非常明亮和均勻的指示照明。

PM系列 - 替換實體接線

I/O無線網路，結合了長視距覆蓋，易於部署和使用。PM2系列在閘道和節點中都有四個源數位訊號輸入、四個源數位訊號輸出、兩個類比輸入和兩個類比輸出。

30 mm Illuminated Touch Buttons: K30 Series

Ergonomically designed to eliminate hand, wrist, and arm stresses associated with repeated switch operation.

K50 核心系列 50 mm 通用型帶觸控開關指示燈

K50系列觸控按鈕結合大型、明亮的指示燈，具有固態觸控切換功能，是先進製造和零件拾取應用的理想選擇。

K50 Pro Series 50 mm Programmable Optical Pick-to-Light

The K50 Pro Series includes a 50 mm multicolor RGB Optical device with PICK-IQ, IO-Link, and Pro Editor to offer advanced animation customization and control.