• 返回

    • Predictive Maintenance Made Easy with Banner's Wireless Vibration Solution

    Vibration Monitoring for Predictive Maintenance Image
    Predictive Maintenance Challenges

    Predictive maintenance on machines can be difficult because minor performance changes can be hard to detect without the proper tools. Condition monitoring plays a key role in predictive maintenance and helps prevent costly downtime.  One important condition to monitor is vibration. Machine vibration is often caused by imbalanced, misaligned, loose, or worn parts. As vibration increases, so can damage to the machine. By monitoring motors, pumps, compressors, fans, blowers, and gearboxes for increases in vibration, problems can be detected before they become severe and result in unplanned downtime.

    Wireless Vibration Monitor Makes Condition Monitoring Easy

    Banner's wireless vibration and temperature sensors are meant to serve as a "check engine light" for machines, especially for machines that are remote. The sensors are defaulted to measure RMS velocity, which is the best indicator of general rotating machine health, and high frequency RMS acceleration, which is indicative of early bearing wear.  They can be easily mounted using a standard bracket, a magnetic bracket, or a two-sided thermal transfer mounting tape. The sensors are designed to work with multiple Banner wireless nodes.

    Using Banner’s Vibration Monitoring Solution Guide, it is easy to establish vibration baselines and set warning and alarm thresholds.  Simply follow the Solution Guide instructions and load the configuration files into the DXM; a machine learning algorithm will automatically establish baselines and set thresholds.  When a threshold has been exceeded, a signal can be sent to a wireless TL70 tower light in a central location or an email or text alert can be sent. The vibration and temperature data can also be sent to a DXM100 wireless logic controller or PLC for collection and analysis.

    Featured Products
    Industrial Wireless Controller: DXM Series
    Industrial Wireless Controller: DXM Series

    DXM控制器系列整合了Banner的無線電設備、蜂窩和乙太網路連接以及本地I/O，為工業物聯網(IIoT)提供了一個平台。

    Read More
    聯絡我們的工程師
    Where to Buy
    列印
    加入我的資料庫
    已加入