SPS30 交流/直流直線型電源轉換器

功率轉換器

SPS30 可將 100–240 V 交流轉換為 24 V 直流，提供直流感測器、致動器或其他設備可以整合到交流電壓應用中。配備的 4 安培 SPST 繼電器允許其切換交流或直流負荷，並有交流輸入線，可用於遠端教導或啟動致動器上的工作輸入。

萬用型 100–240 V 交流線路電壓轉換為 24 V 直流電源，為直流感測器供電
PNP 或 NPN 感測器輸出驅動一個 4 安培 SPST-NO（1 形式 A）單軸雙切繼電器，具體取決於型號
交流到直流教導線路教導感測器或作為觸摸按鈕
½ 英寸的工作輸入。交流端 20UNF 5 針雙接線快速接頭
150 mm (6 in.) 根據型號提供帶 M12 或 M8 快速斷開接頭的 PVC 電纜

OPTIMIZE CONTROL SYSTEM PERFORMANCE

Remote I/O

Simplify system design with reduced wiring, onboard diagnostics LEDs, providing you greater flexibility, improved performance, multi-protocol support, and compact designs.

+全部展開 | —全部收起

Downloads

Application Notes

Jam Detection on a Conveyor with Only AC Power

Sensors can be used to detect conveyor jams, but sometimes conveyors use current that is incompatible with sensors. Adding a Banner SPS30 AC/DC In-Line Power Converter to a DC sensor (such as a Banner Q5X) makes the necessary voltage conversion.

Sales Resources

產品選型

載入中...

篩選搜尋結果

清除比較

已選擇的篩選條件

SPS30PAR2PQ5

SPS30 Inline DC Power Supply
AC Input Voltage 90-240 V, DC Output Voltage 24 V
PNP Output to AC NO e/m relay, PNP Input on pin 2
AC Conn 5-pin Micro, DC Conn 200 mm 5-pin M12 Pigtail
SPS30PAR5NQ5

SPS30 Inline DC Power Supply
AC Input Voltage 90-240 V, DC Output Voltage 24 V
PNP Output to AC NO e/m relay, NPN Input on pin 5
AC Conn 5-pin Micro, DC Conn 200 mm 5-pin M12 Pigtail
SPS30PAR5PQ5

SPS30 Inline DC Power Supply
AC Input Voltage 90-240 V, DC Output Voltage 24 V
PNP Output to AC NO e/m relay, PNP Input on pin 5
AC Conn 5-pin Micro, DC Conn 200 mm 5-pin M12 Pigtail
SPS30NAR5NQ5

SPS30 Inline DC Power Supply
AC Input Voltage 90-240 V, DC Output Voltage 24 V
NPN Output to AC NO e/m relay, PNP Input on pin 5
AC Conn 5-pin Micro, DC Conn 200 mm 5-pin M12 Pigtail
SPS30PAR2NQ3

SPS30 Inline DC Power Supply
AC Input Voltage 90-240 V, DC Output Voltage 24 V
PNP Output to AC NO e/m relay, NPN Input on pin 2
AC Conn 5-pin Micro, DC Conn 200 mm 4-pin M8 Pigtail

載入更多顯示全部

特色產品

SPS30 交流/直流直線型電源轉換器

功率轉換器

Incomplete Checkout