SSM Series
安全速度監測模組
Module connects to two sensors with PNP outputs, monitoring rotation (rpm) or linear movement. Provides over-speed, under-speed and zero-speed detection.
- Feedback input monitors external machine control elements
- 24V ac/dc operation
- Two redundant, forced guided output contacts rated at 4A, plus one auxiliary N.C. output contact
- Stop Category 0, per ISO 13850 (EN 418), IEC 60204-1, and ANSI NFPA 79 Category 3, SIL Claimed Level (SIL CL) 3 to EN 62061, Category 3 / Performance Level (PL) e to DIN EN ISO 13849-1
- DIN-rail mountable 45 mm wide housing with removable terminal blocks
- Energizes output relays (closes N.O. contacts), when speed drops below set value, for "standstill" (under-speed) monitoring
- De-energizes output relays (opens N.O. contacts), when speed rises above set value, for over-speed monitoring
模組連接到兩個帶PNP輸出的感測器上，監測轉速（rpm）或線性運動。提供超速、低速和零速偵測。
- 電腦回饋輸入監測外部機器控制元件
- 24V交流/直流工作
- 等級值為4A的雙迴路的強制導向輸出觸點，加上一個輔助NC輸出觸點
- 根據ISO 13850（EN 418）、IEC 60204-1和ANSI NFPA 79類別3、SIL要求級別（SIL CL）3到EN 62061、類別3 /效能等級（PL）e到DIN EN ISO 13849的停止類別0 -1
- DIN導軌可安裝式的45毫米寬的外殼，附帶可移動接線板
- 當速度低於設定值時，啟動輸出繼電器（關閉N.O觸點）－用於「停頓」（速度不足）監測
- 當速度超過設定值時，切斷輸出繼電器（打開N.O.觸點），以進行超速監測
下載
技術文獻
日期
類型
尺寸
手冊和目錄
日期
類型
尺寸
日期
類型
尺寸
產品選擇
已選擇的篩選條件
-
SSM-FM-11A10
Safety Speed Module
Supply Voltage: 24 V ac/dc
Input: Two Sensors with PNP Outputs
Output: 2 NO, 4 A; Aux Output: 1 NC, 4 A
Terminal Block: Removable; Width: 45 mm
Self-Checking Circuitry, Detectable Speed Range 5-10,500 ipm -
SSM-FM-11A20
Safety Speed Module
Supply Voltage: 24 V ac/dc
Input: Two Sensors with PNP Outputs
Output: 2 NO, 4 A; Aux Output: 1 NC, 4 A
Terminal Block: Removable; Width: 45 mm
Self-Checking Circuitry, Detectable Speed Range 10-20,000 ipm