M12鋁製圓柱雷射發射端
- Uses self-contained Class 1 or 2 modulated laser emitters with visible red beam
- Features 12.7 mm diameter smooth aluminum barrel
- Uses 10 to 30V dc supply voltage
- Compatible with a variety of photoelectric receivers
- Features collimated, apertured beam 2 mm in diameter, divergence of less than 1 milliradian
- Delivers excellent mechanical repeatability in position-sensing applications
- 使用一體式1級或2級雷射光發射端（帶有可見紅色光束）
- 採用12.7 mm直徑光滑鋁制金屬圓柱外殼
- 使用10至30V直流電源電壓
- 與各種光電接收端相容
- 採用直徑為2 mm的有孔光束，發散度小於1毫弧度
- 在感測位置應用中提供出色的機械重複性
下載
技術文獻
-
M126E2-1LD
M12 Laser: Class 2 Emitter
Range: 30 m; Input: 10-30 V dc
Output: Not Applicable
2 m (6.5 ft) Cable
650 nm IEC & CDRH -
M126E2LD
M12 Laser: Class 2 Emitter
Range: refer to datasheet; Input: 10-30 V dc
Output: Not Applicable
2 m (6.5 ft) Cable -
M126E2LDQ
M12 Laser: Class 2 Emitter
Range: refer to datasheet; Input: 10-30 V dc
Output: Not Applicable
150 mm (6 in) M8 Pigtail QD -
M126E1LDQ
M12 Laser: Class 1 Emitter
Range: refer to datasheet; Input: 10-30 V dc
Output: Not Applicable
150 mm (6 in) 3-pin M8 Pigtail QD -
M126E1LD
M12 Laser: Class 1 Emitter
Range: refer to datasheet; Input: 10-30 V dc
Output: Not Applicable
2 m (6.5 ft) Cable -
M126E1LDQ5
M12 Laser: Class 1 Emitter
Range: 30 m; Input: 10-30 V dc
Output: Not Applicable
150 mm (6 in) M12 Pigtail QD -
M126E2LD W/30
M12 Laser: Class 2 Emitter
Range: 30 m; Input: 10-30 V dc
Output: Not Applicable
9 m (30 ft) Cable -
M126E2LDQ5
M12 Laser: Class 2 Emitter
Range: depends on receiver used; Input: 10-30 V dc
Output: Not Applicable
150 mm (6 in) M12 Pigtail QD -
M12APRQPMA20
M12 Series: Receiver
Range: 5 m; Input 10-30 V dc
Output: Light operate Solid-State PNP
150 mm (6 in) 4-pin M12 PUR Pigtail QD